|
|
|
Accuphase E-203
- Total Harmonic Distortion
- Power Requirements: 100 V
- Signal-to-noise ratio
- Power Consumption: 55W
|
|
|
|
Accuphase E-212
- Parallel push-pull output stage delivers quality power: 90 watts per channel into 8 ohms
- Current feedback circuit topology provides outstanding high-range phase characteristics
- Logic-controlled relays for optimum signal routing
- Tone control circuitry
|
|
Accuphase E-213
- High quality power 90 watts
- Total operation stability
- Digital signal input
- Analog record playback
|
|
|
|
|
|
Accuphase E-305
- Continuous average output power: 180 watts
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.01%
- Frequency response: 20-20,000 Hz +0.-02dB
|
|
Accuphase E-306V
- Current feedback circuit topology in power amplifier and line amplifier sections prevents phase shifts. - Discrete-type line amplifier for superior sonic purity. - Highly reliable Logic-controlled relays. - tone controls use summing active filters for pure sound. - Robust power supply
|
|
Accuphase E-308
- Preamplifier and power amplifier
- Parallel push-pull output stage
- Current feedback principle
- Logic-control relay
- Tone control circuits
|
|
Accuphase E-405
- Continuous average output power: 250 watts
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.01%
- Frequency response: 20-20,000 Hz +0.-02dB
|
|
|
|
Accuphase E-406V
- Dedicated toroidal transformers and power amplifier and power supply. - Balanced inputs. - Supplied remote commander. - Two sets of large speaker terminals. - Logic-controlled relays allow very short signal paths. - Current feedback principle assures great sound and rock-stable oper
|
|
Accuphase E-407
- Current feedback principle combines superb sound with total operation stability. - Logic-controlled relays for shortest signal paths. - Separator switch allows independent use of pre/power sections. - Large toroidal power transformer.
|
|
Accuphase E-530
- Triple parallel push-pull output stage with power MOS-FETs
- driven in pure class A delivers quality power: 30 watts per channel into 8 ohms
- Current feedback principle ensures superb phase characteristics in high frequency range
- Logic-controlled relays fo
|
|
|
|
|
|
AMC 3020
- Integrated stereo amplifier
- Input level controls
- 5 way binding posts
- large-diameter speaker
|
|
|
|
|
|
AMC CVT3040
Integrated Amplifier
Solid State PreAmp/Valve Amplifier
Class "A:
2-channel
2+ 40W
with phono input stage
|
|
|
|
|
|
Antique Sound Lab AQ 1001 DT
AQ 1001 DT Tube Integrated Amp
Built-in bias controls
Built-in calibrated bias meter
Wireless remote control
Line-level subwoofer outputs
Tube complement: KT88 output tubes x 4; 12AU7 x 4
Inputs: three pairs of gold-plated RCAs
Output: 5-way gold-plated heav
|
|
Antique Sound Lab AQ 1003DT Tube Integrated Amp
AQ 1003DT Tube Integrated Amp
Built-in bias controls
Built-in calibrated bias meter
Wireless remote volume control
Line-level subwoofer outputs
Tube complement: EL34 output tubes x 4; 12AU7 x 4
Inputs: three pairs of gold-plated RCAs
Output: 5-way gold-plate
|
|
Antique Sound Lab AQ1001 High Grade
- Input sensitive 400mV. - Power request 340W. - Fuse 5A Slow blow. - Power cord Detachable. - Output terminal 5 Way Gold Plate Heavy duty. - Chassis Finish Shinning Steel. - Front Panel Finish Aluminum /Gold /Silver or Black Anodizing. - Tube Complement KT88 x 4, 12AU7 x 4.
|
|
Antique Sound Lab AQ1003 Stereo Push pull
- Detachable Power cord. - Heavy duty gold plate 5 ways speaker post Output Terminal. - Shining steel Chassis Finish. - Front Panel Finish (Aluminum /Gold /Silver or Black Anodizing).
|
|
Antique Sound Lab AQ1004 Stereo Push pull
- 3A Slow blow Fuse. - Detachable Power cord. - Heavy duty gold plate 5 ways speaker post Output Terminal. - Shinning steel Chassis Finish. - Front Panel Finish (Aluminum /Gold /Silver or Black Anodizing).
|
|
|
|
Antique Sound Lab AQ1010 DTI
- Distortion at 1W - <0.5%
- Distortion at full power - <3%
- S/N ratio - 85dB (0.6mV)
- Input impedance - 100K
- Output impedance -4,8 ohms
- Power request -245W maximum
- Input sensitivity -1V
- Fuse 5A slow-blow
|
|
Antique Sound Lab Ki22 FOX DT
- Distortion at 1W <0.5%
- Distortion at full power <3%
- S/N Ratio 81dB (1.2mV)
- Output impedance 4,8,16 ohm
- Power request 180W Maximum
- Input sensitive 1V
- Fuse 1A SLOW--BLOW
|
|
Antique Sound Lab LEYLA 845
- Distortion at 1W <0.2%
- Distortion at full power <3%
- S/N ratio 81dB
- Input impedance 100K
- Output impedance 4,8,16 ohms
- Power request 350W maximum
- Input sensitivity 1.5V
- Fuse 10A slow-blow
|
|
Antique Sound Lab Orchid 2a3
- Built in bias meter
- Output power: 3.2W x 2
- Frequency Response: 25Hz-27000Hz ± 1dB
- Distortion at 1W: <2.5%
- Distortion at full power: <5%
- S/N ratio: 75dB
- Input impedance: 100
- Power request: 85W maximum
|
|
|
|
|
|
Arcam A65 Plus
40W x 2 at 8 ohms, remote control, bypassable tone controls, balance control, 4 line inputs, tape loop, optional phono input, preamp output, 2 sets of speaker connectors, detachable power cord.
|
|
|
|
Arcam A80
65W x 2 into 8 ohms, 6 inputs including a MM phono input and tape loop, preamp output.
|
|
|
|
|
|
Arcam DIVA A70
• 55 wpc continuous output into 8 ohms
• Ultra short signal path with class leading fidelity
• Sophisticated menu with text display
• MM phono stage included
• Massive toroidal transformer based power supply
• Mask of Silence technology inc. “Stealth Mat”
• Full function remo
|
|
|
|
Arcam FMJ A22
- High performance
- Output power rated at 100 watts into 8 ohms
- Peak current of 20 amps
|
|
|
|
Audio Analogue Primo Settanta
Solid state integrated stereo amplifier w/ remote control.
70 wpc @8 ohms, 140 wpc @4 ohms
5 line level inputs, 1 tape output
Option MC/MM phono board can be user installed on input #1
High-performance wide bandwidth and low feedback circuits
Separated circuit sections for e
|
|
Audio Analogue Puccini
Power Output: 2 x 40 W @ 8 W / 1kHz / 115 VAC -230 VAC
Input: MM / MC Phono, Tuner, CD, Video, Aux, Tape
Output: Tape (Impedenza/Impedance: 600W)
Speakers/Diffusori ( 4 - 16 W)
|
|
|
|
|
|
|
|
|