|
|
|
!why! Products SILBATONE
SILBATONE
Silbatone is ultra hi-fi brand aims for ultimate sound reproduction and beyond. We believe in the potential of tubes as heart-moving amplifying device.
We bring out maximum performance from tubes(mainly triodes) and balancethem with state of the art technology like u
|
|
|
2100 Software VMB•1
Monoblock Amplifier
Power Output: 40 watts into 8 ohms
Input Impedance: 22k ohms
Gain: 32 db
Dimensions: 6.25"w x 5.5"h x 8.5"d
Weight: 15 lbs (each)
Warranty: 1 Year Parts & Labor
|
|
|
AAD A-5000
- 5 Channel Power Amplifier
- 2,500 Watts RMS (5x500w) MOSFET
- Machined Aluminum Block Construction
|
|
Accuphase A-100 Monophonic Power Amplifier
The A-100 is the result of an uncompromising quest for musical excellence, this pure Class-A monophonic power amplifier uses a MOSFET output stage and an all-stage push-pull bridged configuration. The balanced signal transmission principle is maintained throughout, resulting in clean and powerful s
|
|
Accuphase A-20 Stereo Power Amplifier
The A-20 is a stereo power amplifier operating in pure class A. It incorporates a wealth of sophisticated Accuphase high-end technology. Each circuit device used in the A-20 has been strictly selected to provide top-grade performance. Its conservative power rating combined with unsurpassed musica
|
|
Accuphase A-20V
20W x 2 into 8 ohms
40W x 2 into 4 ohms
80W x 2 into 2 ohms
|
|
Accuphase A-30
- Pure Class A operation
- Power MOS-FET output stage
- Instrumentation amplifier principle
- Further improved MCS circuit topology
- Bridged mode
|
|
Accuphase A-60
- Pure Class A operation
- Power MOS-FET output stage
- Input circuitry with MCS topology
- Bridged mode
|
|
Accuphase C-265 Stereo Amplifier
The C-265 is a stereo control center designed for impeccable sound quality. It incorporates a wealth of prestigious Accuphase technology, such as balanced signal transmission and current feedback line amplifier stages. In its standard configuration, the C-265 offers a versatile array of line-level
|
|
Accuphase E-408
- Triple parallel push-pull output stage delivers high power: 180 watts per channel into 8 ohms
- Preamplifier and power amplifier with MCS topology and current feedback
- Logic-control relays permit straight and short signal paths
- Tone control circuits
- Am
|
|
Accuphase M-100
- Continuous average output power: 800 watts
- Total harmonic distortion: 0.01%
- Voltage Amplification in decibels: 27.8dB
- Frequency response: 20-20,000 Hz
|
|
Accuphase M-1000
- Continuous average output power: 1800 watts
- Total harmonic distortion: 0.05%
- Intermodulation distortion: 0.003%
- Frequency response: 20-20,000 Hz
|
|
|
|
Accuphase M-60
- Power output: 450 watts
- Total harmonic distortion: 4ohms
- Intermodulation distortion: 0.01%
- Frequency response: 2Hz to 150,000Hz
|
|
Accuphase M-8000 Monophonic Power Amplifier
- Ultra-powerful output stage with 22 parallel push-pull transistors remains linear down to extremely low 1-ohm load impedance
- MCS configuration in input stage
- Stabilized power supply in driver stage
- Current feedback circuit topology assures great sound and
|
|
Accuphase P-1000
- Powerful 11-parallel push-pull output stage
- Current feedback circuit topology
- Bridged connection mode
- Massive Super Ring
- Printed circuit boards
- Balanced inputs
|
|
Accuphase P-102
- Damping factor: 70
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-11
- Damping factor: 200
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-20
- Power Output: 100watts
- Total harmonic distortion: 0.1%
- Intermodulation distortion: 0.1%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-250
- Power Output: 140watts
- Total harmonic distortion: 0.1%
- Intermodulation distortion: 0.1%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-260
- Normal operation: 180 watts
- Class-A operation: 45 watts
- Intermodulation distortion: 0.1%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-266
- Normal operation: 180 watts
- Output load impedance: 4 ohms
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000Hz
|
|
Accuphase P-300
- Power Output: 200 watts
- Total harmonic distortion: 4ohms
- Intermodulation distortion: 0.01%
- Frequency response: 1Hz to 250,000 Hz
|
|
Accuphase P-3000
- Triple parallel push-pull output
- Instrumentation amplifier derived
- Advanced MCS circuit topology
- Bridged connection mode
- Massive Super Ring toroidal
|
|
Accuphase P-350
- Power Output: 200 watts
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.02%
- Frequency response: 20Hz to 20,000 Hz
|
|
Accuphase P-360
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000 Hz
|
|
Accuphase P-370 Stereo Power Amplifier
- 3-parallel push-pull output stage delivers linear power into ultra-low impedance loads
- Current feedback circuit topology combines excellent sound quality with total operation stability
- Bridged connection mode allows upgrading to true monophonic amplifier
- M
|
|
Accuphase P-400
- Normal Operation: 300watts
- Total harmonic distortion: 0.01%
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000 Hz
|
|
Accuphase P-450
- 4-parallel push-pull output stage
- Current feedback topology
- Bridge mode creates a true monophonic amplifier
- Large power supply
- Balanced inputs
|
|
Accuphase P-500
- Damping Factor: 500
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.003%
- Frequency response: 20Hz to 20,000 Hz
|
|
Accuphase P-5000
- Powerful 6-parallel push-pull output stage in each channel delivers linear power down to very low load impedances
- Input stage with MCS topology
- Current feedback circuit combines excellent sound quality with total operation stability
- Bridged connection mode all
|
|
Accuphase P-600
- Damping Factor: 300
- Total harmonic distortion: 0.02%
- Intermodulation distortion: 0.01%
- Frequency response: 20Hz to 20,000 Hz
|
|
|
|
|
Accuphase P-7000
- Powerful 11-parallel push-pull output stage in each channel delivers linear power into loads as low as one ohm
- Input stage with MCS topology
- Current feedback circuit combines excellent sound quality with total operation stability
- Bridged connection mode allows
|
|
|
|
|
Accuphase PX-600 Power Amplifier
- Power amplifier with six identical channels
- Parallel push-pull output stages rated for 100W x3(8ohms) or 150W x6(4ohms)
- Bridged operation yields 300W x3(8ohms)
- Current feedback principle combines excellent sound quality with stable operation
- 700
|
|
|
|
|
|
|
|
|
Accusonic MDB1000
5 channel amplifier
200 watts per channel into 8 ohms
320 watts per channel into 4 ohms
|
|
|
Accusonic MDB650
5 channel amplifier
130 watts per channel at 8 ohms
210 watts per channel at 4 ohms
|
|
Acoustic Image Clarus SL
- 250 Watts into 4 ohms
- High and low instrument inputs
- Dual voltage operation
- Switch mode power supply
|
|
|
|
|
|
|
Acurus A150
150 watts per channel continuous, both channels driven into 8 Ohms 20 Hz to 20,000 Hz at no more than 0.06% THD
|
|
Acurus A200
200 watts per channel continuous, both channels driven into 8 Ohms, 300 watts per channel continuous, both channels driven into 4 ohms
|
|
|
|
Acurus A250
250 watts per channel continuous, both channels driven into 8 Ohms 20 Hz to 20,000 Hz at no more than 0.06% THD
|
|
Acurus DIA-100
100 watts per channel continuous, both channels driven into 8 Ohms, 20 Hz - 20,000 Hz at no more than 0.09% THD.
|
|
Acurus DIA-150
High-current, 150W/ch, remote control, no pre-amp required
|
