GREAT SOUND!!! RUNS SUPER QUIET!!

HARD TO GET

I don''t see how you could go wrong here!!! Has better power supply, More advanced RIAA EQ, better design than anything else in the price range. Parts are high quality. Will run SUPER QUIET with a moving magnet or even a moving coil!!! To me, it just sounds "right". Not too bright, not too dark. EXCELLENT rhythm and pace. Maybe not as extended or effortless as the super high priced stuff. But, overall VERY smooth sounding. I''m using it with a Rotel RP-955 turntable, and an Audio Technica AT 440ML. Sounds GREAT for a MM setup, of course, now I''m getting tempted to try a moving coil for that little extra helping of extension and dynamics.(never had a phono pre that would handle MC before) It''s one of the few audio purchases I''ve made that I''m COMPLETELY satisfied with. No regrets at all!! (so I had to write a review) Only drawback is that not many stores that carry Rotel keep the phono pre in stock. And Rotel seems to be super careful about not having their stuff sold on the web. I just went to the Rotel web site, found my nearest dealer and had them order it for me. It took about three weeks for it to come in, but it was WELL WORTH the wait!!! Obviously, I HIGHLY recommend this unit. Don''t settle for less just because this is a little harder to get!!!

Similar Products Used:

Various built-in and lower-priced phono preamps.

Good output level. Great Sound. 5 Year Warranty. Well built. ON/OFF switch on front.

None. Captive AC power cord.

My new Acurus RL11 preamp has no phono stage. I have a Technics SL1700 turntable with Audio Teknica cartridge with shibata stylus. Not the highest end setup, but sounds good.

A relative gave me a Recoton preamp. Yeah, I know. But it was tolerable for a while. Then I obtained a QED Discsaver phono stage, made in England. This was better, but had too low an output level for recording.

I finally got the Rotel. What a preamp! It is one heavy unit. Very well built. MM/MC switch. Ground connector for turntable ground lead. Front Panel AC Power switch.
Very well made, and has a five year warranty.

The sound is excellent. Highs are perfect. Detail is superb. Lows solid. No audible noise. One beautiful sounding machine! I am very happy with it.

Stereophile Magazine gives it a good review and recommends it.

I am very happy with it. And I also recommend it.

Similar Products Used:

QED Discsaver, Rotel receiver preamp.Recoton (uggh).

I recently replaced my NAD 314 Integrated amp with a new one that did not have a phono stage. I heard that the Rotel BQ970BX was a very decent sounding phono stage for a very reasonable price so I ordered one & I have to agree. It sounds great & my vinyl has never sounded better. I think it is better sounding than the one in my old NAD & I highly recommend it to anyone that cannot afford the high-priced spread!

If your looking for a good inexpensive way to play your record collection through a line level preamp I would highly recomend the Rotel 970 BX. It is compact, well built and sounds excellent for the money. It will give you both MM and MC loading capabilities. I have tried it with a Shure V15 MR and the pair mate very well. Two other pieces of advice, use the best possible cable to your preamp you can afford, and keep the unit as far away from digital sources [CD Players, DAT Recorders, etc.] as you can.In fact I recomend using a powerline conditioner with switchable and non-switchable outlets. Plug all your digital equipment into the switchable and switch the outlets off when listening to records, or any other analog sources. By the way the Rotel is usually discounted, another great feature. Happy listening.

Can sound overly warm and muddy, average soundstaging, average detail resolution.

Th Rotel is a good sounding unit, better than the Creek, but too warm and fuzzy to be considered really hi-fi.

The Rotel is a full width, slimline unit, a basic black box. Captive power cord, MC/MM switch. I didn't evaluate the MC section. The circuit is well laid out around two opamps per channel, with Black Gate capacitors used for the power supply and bypassing. The power transformer looks to be mu-metal shielded and is offset away from the input circuitry. The regulation circuitry has substancial filtering capacitance. There appears to be a small coupling capacitor between the two gain stages, however, which looks pretty low grade.

I found I had to use a lean sounding cartridge (Grado 8MZ) and tweak my arm's VTA to control what seems to be an excess of mid-bass energy. Let me step back and say my direct reference was a DIY phono preamp I built which I've measured to be accurate to the RIAA standard to 0.2 dB. It doesn't sound all that great, though. I built it with opamps like the Rotel, but the sound of my unit is too cold and thin, with all the energy seemingly focussed in the treble region. My project emphasizes the 1kHz and up, the Rotel 1kHz and down.

The two units were clearly opposite extremes, surprising given the similar circuits employed. I'd love to know if the Rotel accurately followed the RIAA standard, or if they've tweaked the frequency response. I'm guessing that there is a mid-bass lift employed, to compensate for the lack of any real bass below 50 hz. The treble also seems severely shelved down.

But...

It sounds good! There is a lot of music coming through, and the tonal balance is very enjoyable. Pop/Rock/Jazz is generally better served than Classical, for which clarity is more important than tone. Though what does come through is good and surprisingly accurate tonally, the Rotel doesn't resolve much detail, and bass resolution is particularly sloppy.

The Creek OBH-8, by the way, is just grey in comparison. Not much of anything, bass, treble, dynamics, detail or tone. You name it, it doesn't do it. The Rotel is far better, and is the logical choice until you can afford/build somthing better.

Similar Products Used:

Creek OBH 8 and 8SE, tube and SS DIY phono stages, UREI 1620, others.