|
A
|
B
|
C
|
D
|
E
|
G
|
H
|
J
|
K
|
L
|
M
|
N
|
O
|
P
|
[R]
|
S
|
T
|
U
|
V
|
X
|
Y |
|
|
Raysonic SP120
Manufacturer:
Raysonic Inc.
www.raysonicaudio.com
416-332-8928
Canadian Distributor:
Harmonic Marketing Inc.
www.harmonicmarketing.com
416-738-3202
Price:
$2380 (Canadian MSRP)
Raysonic SP-120 Integrated
Amplifier
Output power: 50 w x 2 cha
|
|
Red Rose Music Spirit IA-1
- Compact, vertical standing design
- Attractive silver matte finish
- Simple, easy-to-use control panel
- Gold-plated speaker binding posts and input connectors
- Four line-level inputs 1 line-level output
|
|
Red Wine Audio Signature 30
30 WPC Class D amplifier with rechargeable SLA high-current battery power and DACT CT2 precision stepped attenuator volume control.
|
|
Rega Brio
The Brio is a simple, high performance, integrated amplifier. The design and cost has been concentrated on the highest possible sound quality rather than gadgets, buttons and unnecessary frills often found at this price range.
38w RMS per channel into 8 ohms
5 inputs: Phono, CD, Tuner, Li
|
|
Rega Elicit
Discrete circuitry used in the signal path.
Polypropylene capacitors used in all sonically critical positions.
High specification Relay switching used throughout.
Symmetrical power amplifier utilizing state of the art Sanken Darlington output transistors with enhanced thermal stab
|
|
Rega Mira
a high performance audio amplifier using the Improved “type 3” Rega Alpha-Encoder control system comprising of high quality loss-less relays, plus a digitally controlled analog switched resistor network volume control. The Mira 3 is housed in the Rega custom-built extruded aluminium case incorporati
|
|
Rogue Audio Tempest
Tempest Integrated Tube Amplifier
General Features:
Ultra-wide bandwith output transformers
Massive high storage power supply
Matched quad output tubes
User selectable 4 or 8 ohm output taps
User selectable triode or ultralinear output
(4) KT88, (2) 6SN7, (
|
|
Rogue Audio Tempest II
Specifications
output power: 90WPC minimum
THD: <0.1% typ., <1% at rated power
frequency response:
20Hz - 20KHz at peak output,
10Hz - 100KHz at 10 watts
input sensitivity: 1.0V RMS
dimensions: 18" W x 15¾" D x 7" H
weight: 60 lbs
shipping weight: 6
|
|
|
|
Roksan Kandy MKIII
115W x 2 into 8 ohms, 220W x 2 into 4 ohms, damping factor 110, 38dB gain, 5 line level inputs, moving magnet phono input, tape loop, headphone jack, remote control.
|
|
ROTEL RA-01
40 watts x 2 into 8 ohms
6 inputs, including MM phono and one tape loop
Two sets of speaker outputs
Headphone jack
Defeatable tone control
Balance control
Pre-outs
12 volt trigger output
Detachable IEC power cord
No remote control
|
|
ROTEL RA-02
40 watts x 2 into 8 ohms, 6 inputs including MM phono and one tape loop, 2 speaker outputs, headphone jack, defeatable tone control, balance control, pre-outs, 12 volt trigger output, detachable IEC power cord, remote control
|
|
ROTEL RA-03
- Low noise-resistors
- Big sound stage
- Utilizing components
- Sonic qualities
- High current sections
|
|
ROTEL RA-06
70 watts x 2 transistor Integrated Amplifier
|
|
ROTEL RA-1062
60 watts x 2 into 8 ohms, 6 inputs including MM phono stage and two tape loops, two speaker outputs, headphone jack, separate record/listen, defeatable tone contour control, balance control, pre-outs, 12 volt trigger output, removeable IEC power cord, remote control
|
|
ROTEL RA-1070
100 watts x 2 into 8 ohms, 8 inputs including MM phono and two tape loops, two speaker outputs, headphone jack, separate record/listen, defeatable tone contour controls, two pre-outs, RS-232 interface, 12 volt trigger, RJ-45 connector, RR-969 remote control
|
|
|
|
|
|
|
|
ROTEL RA-971
60 Watt Stereo Integrated Amplifier (1997-1998)
|
|
|
|
|
|
|
ROTEL ROTEL RA-06
• 70 watts x 2 into 8 ohms
• 6 inputs: mm phono, tuner, cd, aux 1, aux 2 and media player
• Headphone jack, defeatable tone control
• Pre-outs for bi-amplification
• 12 volt trigger output
• "Rotel System" remote control
|
