|
A
|
B
|
C
|
[D]
|
E
|
G
|
H
|
J
|
K
|
L
|
M
|
N
|
O
|
P
|
R
|
S
|
T
|
U
|
V
|
X
|
Y |
|
|
Dared DV-80
Model: DV-80
INTEGRATED POWER AMPLIFIER
(PUSH-PULL)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 25Wx2
FREQUENCY RESPONSE: 20-20KHz (±1.0dB)
DISTORTION: =1%
SIGNAL TO NOISE RATIO: =84dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE: L420 X W265 X H
|
|
|
|
Dared MP-60
Model: MP-60
INTEGRATED AMPLIFIER
(PUSH-PULL)
TECHNICAL
SPECIFICATIONS:
MAX OUTPUT POWER:
20Wx2 (SELF BIAS)
40Wx2(FIXED BIAS)
FREQUENCY RESPONSE:20-20KHz (±0.5dB)
DISTORTION: =1%
SIGNAL TO NOISE RATIO: =85dB
INPUT SENSITIVITY: 350mV
INPUT
|
|
Dared MP-7
MP-7
INTEGRATED AMPLIFIER
(Single-End Class A)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 6Wx2
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =2%
SIGNAL TO NOISE RATIO: =84dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE:
|
|
Dared VP-10
Model: VP-10
INTEGRATED/POWER QUASI-MONOBLOCK AMPLIFIER (PUSH-PULL)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 10W
FREQUENCY RESPONSE: 20-20KHz (±1dB)
DISTORTION: =1%
SIGNAL TO NOISE RATIO: =86dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE: L285
|
|
Dared VP-16
VP-16
INTEGRATED AMPLIFIER
(PUSH-PULL)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 12Wx2
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =2%
SIGNAL TO NOISE RATIO: =82dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDAN
|
|
Dared VP-20
Model: VP-20
INTEGRATED/POWER QUASI-MONOBLOCK AMPLIFIER (PUSH-PULL)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 18W
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =1%
SIGNAL TO NOISE RATIO: =85dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE: L2
|
|
Dared VP-300B
Model: VP-300B
QUASI-MONOBLOCK POWER AMPLIFIER
(SINGLE-END CLASS A)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 6W
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =2%
SIGNAL TO NOISE RATIO: =85dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE:
|
|
Dared VP-845
Model: VP-845
INTEGRATED AMPLIFIER
(SINGLE-END CLASS A)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 18Wx2
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =1%
SIGNAL TO NOISE RATIO: =84dB
INPUT SENSITIVITY: 250mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE: L500 x W260
|
|
Denon PMA 700
Mid 80s Integrated Amp with 100 watts Pure Current Power.
|
|
Denon PMA 900
Mid 80s Integrated Amp with 120 watts Pure Current Power.
|
|
|
|
|
|
Denon PMA-1500AE
Rated Output Power
(4 ohms, 1 kHz, THD 0.7%) 140 W + 140 W
Rated Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.07%) 70 W + 70 W
Power amp construction: discrete
UHC-MOS-FET Transistors (new Generation)
Single Push-Pull Circuit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Denon PMA-S10 II
Integrated stereo amplifier
2x100W/8ohms ; 2x200W/4ohms
2 sets of speaker terminals
1 RCA disc input (MM/MC selectable)
1 XLR balanced high level input
5 high level RCA inputs
2 RCA recording outputs + monitoring
Balance, tone controls, source direct switch
Weight : 3
|
|
Denon PMA-S10II
2 channels integrated amplifier
2x100 W / 8 ohms
2x200 W / 4 ohms
Tone controls, balance, bypass
1x balanced XLR input
Phono selectable MM/MC input
6x line level inputs
2x REC outputs with monitoring
2x universal speaker outputs sets for bi-wiring
Remote controlab
|
|
|
|
|
|
|
|
|
Diapason 2A3
- Inputs: 3 Line / 1 Tape
- Outputs: 1 Tape Loudspeakers
- Frequency Response: 12 Hz / 48 KHZ - 0,5 DB
- Power: 4,7 Watt 4/8 Ohm
|
|
|
DK Design VS. 1 Reference Mk. III
The VS. 1 Reference Mk. III is a massively over-built integrated amplifier that provides a complete solution for a high performance music system. The amplification stage uses a unique topology to deliver high linearity similar to that of traditional class A circuits with low heat output and can deli
|
|
|
