|
|
|
|
|
|
|
Db-99 MkII
- System Type: Three-Way High- Sensitivity Speaker
- Sensitivity: 98 To 99 Db Measured In Room, Using One Watt At One Meter
- Impedance: 8 Ohms Nominal; Flat Impedance Curve Ensures Set Amplifier Stability
- Frequency Response: 21hz To 25khz +/- 3db
- Dimensions: 43" High X 17" Deep X 8" Wide At Top X 13" Wide At Bottom
- Bass System: 10" Super-Duty Woofer With Thick Carbon-Impregnated Paper Cone
- Booster Amplifier: 300-Watt Solid-State Secondary-Stage Amplifier
- Midrange Driver: 7" Cast Frame Driver Employing Exotic Cone
|
|
|
|
VM-3
Two custom 5¼" woven carbon fiber cone, rubber surround
Woofer, One 1" aluminum alloy dome diaphragm, magnetic fluid cooling, low natural resonance
Frequency Response 35 to 25k
Sensitivity (@ 2.83V, 1m) 86dB
|
|
|
|
|
|
|
VR 11
- Dynamic-driver six-way system
- Acoustic suspension design
- Three sets of five-way WBT Platinum posts enabling tri-wiring
- Subwoofer Amplifier Power: 1000 watts rms Class D technology
- Frequency Response: 15-35 kHz, +/- 1 dB, 10 Hz-50 kHz –6 dB, (+/- 1dB at midband)
- Impedance: 8 ohms avg. (5 ohm dips between 200Hz-300 Hz and 6kHz-12kHz)
- Recommended Power: 20 watts up to 1000 watts (music power)
- Sensitivity: 96 dB @ 1w/1m using 2.83 v
|
|
|
|
VR-1
Woofer: 6.5" resin impregnated mica/cellulose composite cone, cast frame, high temperature voice coil, and large shielded magnet. VSA Low Distortion Motor system.
Tweeter: 1" composite silk dome VSA tweeter with resin impregnation, large shielded magnet and high-temp voice coil. VSA Low Distortion Motor system.
Crossover: Phase-coherent Global Axis Integration Network with stacked First Order circuits configured to enable 4th order acoustic slopes for minimum cross-talk distortion and reduced lobing.
Frequency Response: 40Hz to 25 kHz (-3dB points, in-room). Anechoic Graphs included*
Impedance: 8 ohms nominal, 5 ohms min.
Sensitivity: 89 dB @one watt/one meter. (in-room, non anechoic)
Power Handling: 100 watts continuous music (200 watts per channel peak).
|
|
|
|
VR-1100
Pair
This compact and ultra-slim tower has an almost unbelievable punch for it’s size. A side firing, high power 8" glass resin woofer is transmission line loaded for deep and powerful bass response. Midrange frequencies are clearly reproduced by a 5.5" glass fiber diaphragm for high transparency, while treble is ultra smooth due to 1" synthetic dome with Ferrofluid cooling. Huge soundstage imaging and dipolar semi-omnidirectional response is generated by the 1" rear-firing ambience driver with Spatial Dimension circuitry.
The highest quality crossover parts are utilized, including polypropylene and mylar capacitors on the tweeter circuit, along with large gage air cored inductors. The woofer inductor can handle 500 watts before saturation, and all wiring is solid core 5-9's high purity copper with foamed Teflon dialectric shielding. Single set of five way binding posts are solid brass with gold plating, and can not be stripped or broken. Can be ordered with CE binding posts.
Solid hardwood endcaps are available in dark red cherry, natural cherry, natural oak, and black laquer oak. Grill colors are black, off-white, or desert sand.
Power rating: 10 to 200 watts. Frequency range: 32Hz- 25kHz. Impedance: 8 ohms nominal. Sensitivity: 90dB. Weight: 65 lbs. Size: 7"w, 16"d, 40"h.
|
|
|
|
VR-2
- Three-way, four driver system, with Transmission-line woofer design
- Woofer System: Twin 165mm (6.5") composite cone Low-Distortion drivers
- Damping System: Resonance Trap cavity provided for insertion of lead shot
- Frequency Response: 25 Hz to 25 kHz, -3dB (+/- 1 dB in the midrange)
- Power Handling: 20 watts minimum power, 200 watts maximum r.m.s., 500 watts peak
|
|
|
|
VR-3.5
- Dynamic-driver four-way system
- The triple-chambered transmission line
- Frequency Response: 35-20kHz, +/- 1.5 dB, 28Hz-25kHz -6dB (+/- 1dB at midband)
- Impedance: 6 ohms avg. (4 ohms 20Hz-200Hz; 8 ohms 200Hz-20kHz)
- Recommended Power: 10 watts up to 200 watts peak power
- Sensitivity: 89dB @ 1w/1m using 2.83v
|
|
|
|
|
|
|
VR-5
Dynamic-driver four way system using transmission line loading.
Wall construction uses heavily braced 1.5” MDF
28-20kHz, +/- 1.5 dB, 20Hz-25kHz –6dB.
|
|
|
|
|
Popular Floorstanding Speakers
|
|
|
|
| more... |
|
|
0 of 5
4.8 of 5
4 of 5
