|
|
|
|
|
|
|
108 TB
- Sensitivity: 500mV for rated output
- Maximum SPL: 1 m 103dB (average), 109dB (peak)
- Driver Complement: 203mm (8") bass unit
- Enclosure Direct radiating vented MDF
|
|
|
|
110 CS
- Sensitivity: 500mV for rated output
- Frequency Response: (+/-3dB) 31Hz - 150Hz, (-10dB) 26Hz
- Maximum SPL: 1 meter 105dB (average), 111dB (peak)
- Driver Complement: 254mm (10") bass unit
- Enclosure Direct radiating vented MDF
|
|
|
|
Arena
- Output Power: 300W RMS
- Low Frequency Response (-6dB): 29Hz
- Mains Voltage: 120V nominal
- Maximum Power Consumption: 416VA
|
|
|
|
B475
- 18" subwoofer designed
- Ultra-low frequencies
- Concert sound reinforcement
|
|
|
|
B950
- Nominal impedance: 4 ohm
- Frequency response: 28Hz - 240Hz
- Power Handling (RMS/Programme): 600 W / 1200 W
- Enclosure type 18mm Birch plywood
- Peak SPL (half space): 135 dB
|
|
|
|
EFX5.1
- Power output: 100W Watts
- Frequency response: 45Hz - 140Hz
- Driver: 200mm
- Power requirements: 115
|
|
|
|
Fusion TS10 Subwoofer Speaker
Complement your home theater or studio system with the powerful TS10 subwoofer from the Tannoy TS Series. The ultimate performance in either a traditional stereo or 5.1 surround system, the TS10 offers power and accuracy that will satisfy even the most discerning customer.
|
|
|
|
Fusion TS8 Subwoofer Speaker
Complement your home theater or studio system with a powerful subwoofer from the new Tannoy TS Series. The ultimate performance in either a traditional stereo or 5.1 surround system, the TS8 and TS10 offer power and accuracy that will satisfy even the most discerning customer.
|
|
|
|
|
|
|
PS110
- Dimensions 17.5 in. W x 11.3 in. H x 16.5 in. D
- Bass unit with variable low-pass filtering
- Integral 110W power amplifier
- 80Hz high-pass filter
|
|
|
|
Sensys-DCC
- Core element of sound quality
- Cutting edge technology
- Multi channel A/V system solutions
|
|
|
|
SSub 15
The Sub 15 5.1 provides a complete solution for Reveal 5.1 surround monitoring. It contains 6 channels of amplification and user-switching of filtering on every channel to allow the internal crossovers to be used, or for frequencies to be determined by an external processor.
For sub frequencies a 100W RMS amplifier drives the 380mm (15") bass unit. A 100W RMS amplifier is also built-in for the centre channel, and 4 x 70W amplifiers for the left, right and rear channels.
|
|
|
|
TD Sub
- Peak output power: 400 Watts
- Low frequency response: 18 - 100Hz
- Bulit In Amplifier: DC coupled Mosfet
- Mains voltage: 115
|
|
|
|
TS10
- Active subwoofers
- Multi channel recordings
- Dynamic bass performance
- Down-firing drive unit
- Maximum sound output
|
|
|
|
TS112 iDP
- Frequency Response: 25Hz-150Hz
- Mains Voltage: 115
- Power Consumption: 45W
- Dynamic Range: 113 dB
|
|
|
|
TS12
- Active subwoofers
- Multi channel recordings
- Dynamic bass performance
- long-term reliability
- Dynamic movie scores
- Maximum sound output
|
|
|
|
TS12 Subwoofer Speaker
Complement your home theater or studio system with a powerful subwoofer from the new Tannoy TS Series. The ultimate performance in either a traditional stereo or 5.1 surround system, the TS12 offers power and accuracy that will satisfy even the most discerning customer. The TS Series utilizes long throw transducers that are carefully designed to maximize the low frequency extension while maintaining the ability to deliver high sound pressure levels required by today''s music and film soundtracks. The TS Series employs state of the art electronic circuitry to control and integrate into a 2-channel or 5.1 system and provide increased dynamics and a cleaner transient response. The result is a system that provides the accurate, musical bass dynamics needed for today''s modern recordings and soundtracks with the impact and depth that was intended.
|
|
|
|
TS212 iDP
- Ultra high performance SuperTweeter
- On-board digital processing
- 300 Watts RMS
- Professional system installation
|
|
|
|
TS8
- Active subwoofers
- Multi channel recordings
- Dynamic bass performance
- Down-firing drive unit
- Maximum sound output
|
|
|
|
|
|
|
VS10 BP
- Single high efficiency 250mm (10”) drive unit
- High-pass output connectors
- 4mm binding posts
- Single amplifier channel
- Low frequency response
|
|
|
|
VS15 BP
- Frequency Response: ±3dB 36Hz - 160Hz -10dB 32Hz
- Driver Complement: 1 x 381mm (15") bass unit
- Connectors: 2 x Neutrik Speakon
|
|
|
|
VS15 HL
- Frequency Response: ±3dB 60Hz - 300Hz -10dB 51Hz
- Power Handling: 400 Watt
- Maximum SPL: 130dB
|
|
|
|
VS18 DR
- High definition sound reinforcement
- Low/ultra-low frequencies
- Extremely low distortion
- Power compression
|
|
|