|
|
|
|
|
|
|
8.1Bas
- 8" Mica-Filled Polypropylene Cone
- Dual Voice Coil Woofer
- Front mounted adjustable Low Pass Crossover, 80Hz or 120Hz
- Efficiency: 89dB 1W/1m
- Power Recommendations: 5 - 100 watts (undistorted)
- Impedance: 8 OHMS
- Frequency Response: 33Hz - 120Hz or 33Hz - 80Hz
|
|
|
|
8.1BAS Subwoofer
The 8 In-Ceiling Bass Augmentation System enhances the low frequency response of any in-ceiling or in-wall speaker system; this is particularly effective in large rooms. The BAS systems have built-in crossovers. This allows you to connect your in-ceiling or in-wall speakers to the BAS, which will direct the bass to the BAS and the higher frequencies to your other (satellite) speakers. By selecting one of the three frequency settings, you can control the amount of bass that is sent to the BAS. For instance, if you have small speakers you would set the switch to a high frequency. This will allow your small speakers to play effortlessly, hence, sound better with less distortion. If you have larger speakers, you would set the switch to a low frequency, allowing your larger speakers to reproduce the mid bass and the BAS to play only the low, or sub-bass. This will produce tighter and deeper bass response. No matter how you configure the BAS with any speaker system, you will always get greater saturation, higher SP
|
|
|
|
8.2Bas
- 8" IMG Cone, Dual Voice Coil Woofer
- Front mounted adjustable Low Pass Crossover, 80Hz or 120Hz
- Efficiency: 90dB 1W/1m
- Power Recommendations: 5 - 100 watts (undistorted)
- Impedance: 8 OHMS
- Frequency Response: 30Hz - 120Hz or 30Hz - 80Hz
|
|
|
|
8.2BAS Subwoofer
The 8 In-Ceiling Bass Augmentation System enhances the low frequency response of any in-ceiling or in-wall speaker system; this is particularly effective in large rooms. The BAS systems have built-in crossovers. This allows you to connect your in-ceiling or in-wall speakers to the BAS, which will direct the bass to the BAS and the higher frequencies to your other (satellite) speakers. By selecting one of the three frequency settings, you can control the amount of bass that is sent to the BAS. For instance, if you have small speakers you would set the switch to a high frequency. This will allow your small speakers to play effortlessly, hence, sound better with less distortion. If you have larger speakers, you would set the switch to a low frequency, allowing your larger speakers to reproduce the mid bass and the BAS to play only the low, or sub-bass. This will produce tighter and deeper bass response. No matter how you configure the BAS with any speaker system, you will always get greater saturation, higher SP
|
|
|
|
Bass
- Low frequency response
- Built-in crossovers
|
|
|
|
BassX
- Incorporate long throw woofer
- Huge bass response
- Variable low pass crossover
- Fixed high-pass crossover circuit
- Front-mounted controls
|
|
|
|
BassX Dual 6 Subwoofer
SpeakerCraft BassX Dual 6 floor standing subwoofers incorporate two long throw woofers, which deliver the deepest possible bass response, while utilizing the smallest cabinets possible.
|
|
|
|
BassX Dual 8 Subwoofer
ome Theater demands earth-shattering bass response. SpeakerCraft BassX series of floor standing subwoofers incorporate long throw woofers, which deliver the deepest possible bass response, extending down to the 20Hz range.
|
|
|
|
BassX W10 Subwoofer
Why hasn''t there ever been a great sounding in-wall subwoofer? We have been pondering this since the late 1990''s when we embarked on a mission to create the best in-wall subwoofer on the market. The result is an entirely new speaker system. The BassX-W10 features a proprietary 10" woofer with an inverted neodymium magnet structure. The "magnet on front" design allows for flush appearance with the wall when installed.
|
|
|
|
BassX-10
- 10" Long Throw Woofer
- Auto Power On/Off
- Front Mounted Control
- Variable Low Pass Crossover from 40Hz - 150Hz
- Built-In High Pass Crossover
- High Density Cabinet with Front Mounted Ports
- Dimensions: W 14-3/8" x D 15-7/8" x H 14-3/8" (+1/2" for Feet)
|
|
|
|
BassX-10 Subwoofer
Home Theater demands earth-shattering bass response. SpeakerCraft BassX series of floor standing subwoofers incorporate long throw woofers, which deliver the deepest possible bass response, extending down to the 20Hz range. These high power subwoofers boast 150 watt and 250 watt robust amplifiers. Each subwoofer is designed for huge bass response, easy system setup and flexibility. They feature line level inputs to connect to most any receiver or preamp, a continuously variable low pass crossover so you can adjust the subwoofer to match the bass response of your main speakers, adjustable phase switch and a proprietary SpeakerCraft bass boost circuit. Both models are equipped with a fixed high-pass crossover circuit to cut off the bass to the front (main) speakers so the upper bass will not overlap, thereby avoiding booming.
|
|
|
|
BassX-12
- 12" Long Throw Woofer
- Front Mounted Controls
- Variable Low Pass Crossover from 40Hz - 150Hz
- Built-In High Pass Crossover set at 75Hz
- High Density Cabinet with Front Mounted Ports
- Dimensions: W 177/8" x D 187/8" x H 177/8" (+1/2" for Feet)
|
|
|
|
BassX-12 Subwoofer
Home Theater demands earth-shattering bass response. SpeakerCraft BassX series of floor standing subwoofers incorporate long throw woofers, which deliver the deepest possible bass response, extending down to the 20Hz range. These high power subwoofers boast 150 watt and 250 watt robust amplifiers. Each subwoofer is designed for huge bass response, easy system setup and flexibility. They feature line level inputs to connect to most any receiver or preamp, a continuously variable low pass crossover so you can adjust the subwoofer to match the bass response of your main speakers, adjustable phase switch and a proprietary SpeakerCraft bass boost circuit. Both models are equipped with a fixed high-pass crossover circuit to cut off the bass to the front (main) speakers so the upper bass will not overlap, thereby avoiding booming. With front-mounted controls, full shielding, twin front firing ports and clean responsive sound, installers will love hooking these up. Cabinets yearn to be stuffed and the room begs to be
|
|
|
|
BassX-2 Subwoofer
The BassX-2 in-ceiling powered subwoofer delivers thundering bass, while remaining completely recessed in the ceiling behind a flush mounted grille. Decisions of where in the room to put the subwoofer have now been simplified. No longer does valuable floor space have to be sacrificed to obtain the performance needed for sensational home theater bass. The BassX-2 sports dual 8 woofers this design provides for powerful, deep bass to be produced in a small cabinet. The ingenious mounting system allows it to be easily installed in almost any ceiling. BassX-2 can easily be retrofit after the home is built. The entire installation can be completed through the 1012 cut out in the ceiling.
|
|
|
|
BassX-8
- 8" Long Throw Woofer
- Auto Power On/Off
- Variable Low Pass Crossover from 40Hz - 150Hz
- Built-In High Pass Crossover set at 75HZ
- High Density Cabinet with Front Mounted Ports
- Dimensions: W 11-3/4" x D 12-1/4" x H 11-3/4" (+1/2" for Feet)
|
|
|
|
BassX-8 Subwoofer
Home Theater demands earth-shattering bass response. SpeakerCraft BassX series of floor standing subwoofers incorporate long throw woofers, which deliver the deepest possible bass response, extending down to the 20Hz range. These high power subwoofers boast 150 watt and 250 watt robust amplifiers. Each subwoofer is designed for huge bass response, easy system setup and flexibility. They feature line level inputs to connect to most any receiver or preamp, a continuously variable low pass crossover so you can adjust the subwoofer to match the bass response of your main speakers, adjustable phase switch and a proprietary SpeakerCraft bass boost circuit. Both models are equipped with a fixed high-pass crossover circuit to cut off the bass to the front (main) speakers so the upper bass will not overlap, thereby avoiding booming. With front-mounted controls, full shielding, twin front firing ports and clean responsive sound, installers will love hooking these up. Cabinets yearn to be stuffed and the room begs to be
|
|
|
|
BassX-W10
- 10" Custom Woofer
- Cast Aluminum Basket
- Inverted Magnet Structure Design
|
|
|
|
BassX-W10 AcoustaCell
- For use with Retrofit installations
- Simply installs through the standard speaker wall opening
- Allows the woofer to produce deep bass frequencies
- Virtually eliminates Helmholtz resonance and standing waves
- Dimensions: W 14-1/2" x D 4" x H 34-1/2"
|
|
|
|
SUB8 Rox Subwoofer
Thanks to a new revolutionary process, the actual speaker remains completely unseen behind a grille that matches the Rox’s surface and texture so closely, that the speaker is nearly impossible to see. The enclosure is so durable that it can withstand rain, snow, and hot sun.
|
|
|
|
|
|