|
|
|
|
|
|
|
RC 1070
Optimized for the real-world audiophile who demands flexibility and sound quality at an affordable price, the RC-1070 preamplifier delivers an extraordinary level of satisfaction. Featuring traditional Rotel engineering prowess, this unit features a power supply based on a custom-made toroidal transformer. The RC-1070 provides six line-level inputs in addition to a carefully engineered phono input for moving magnet and high output moving coil cartridges. A convenient contour control allows easy and repeatable timbre adjustments. With two sets of main outputs, a 12 volt “trigger ” jack, and a Rotel-system remote control for both the pre-amplifier and a companion Rotel CD, tuner, or DVD player, the RC-1070 brings the flexibility and sound quality of Rotel separates within easy reach.
|
|
|
|
RC-03
- 3 independant oscillators
- Envelope control
- 2 LFOs
- 4 events controlers
- 16 notes polyphony
- Glide (portamento)
- LP filter with envelope control
- Arpeggiator
- Processor optimisations
|
|
|
|
RC-1082
Rotel understands the importance of keeping the signal as pure as possible all the way through the electronics chain. We achieve that goal by carefully selecting the components that go into our electronics and in the design of the circuit topology itself. While the RC-1082 is designed for the hi fi purist in terms of absolute musical fidelity, it is also a very flexible design and accommodates up to nine source components including a low noise, high overload MM/MC phono stage with discrete differential input stages, CD, tuner, two tape inputs and three auxiliary inputs. There’s also a media player input located on the front panel to accommodate MP3 players. In addition to its generous input capabilities, Rotel’s RC-1082 is a custom installation friendly device and may be controlled from a remote access point via its RS-232 interface or IR input. The preamplifier includes further features such as a detachable AC cord, discrete on/off remote control command codes and a full-function remote control. Musical, accurate, and accommodating, the RC-1082 preamplifier is the perfect choice for audio enthusiasts seeking the best in hi-fi performance
|
|
|
|
RC-1090
The RC-1090 is the latest expression of Rotel ’s continuing dedication to providing the finest components for traditional two channel music reproduction. Beginning with a custom Rotel made toroidal transformer, the low output impedance power supply makes extensive use of the new ultra-fast T-Network capacitors. Circuits for each channel follow Symmetrical Circuit Trace strategy to ensure precise timing, pinpoint imaging,and accurate soundstaging. Rigorous parts selection includes metal foil resistors, polystyrene, and polypropylene signal capacitors. The output stage is particularly noteworthy for its high current, low impedance design which provides substantial current reserves for driving even the most difficult interconnect/amplifier combinations. Flexibility? The RC-1090 boasts eight inputs, including a low noise, high overload MM/MC phono stage and a balanced input with XLR connectors. A centrally-located information display provides instant system status checks. Separate Listen and Record selectors provide additional capability. Balanced XLR outputs supplement the industry-standard RCA connections and make the RC-1090 an ideal match for all high performance amplifiers. A programmable remote control, RS-232 interface, two 12 volt “trigger ”outputs, a detachable AC cord, two AC convenience outlets, and discrete on/off remote control command codes complement the RC-1090 ’s exceptional performance.
|
|
|
|
RC-1550
- IM Distortion: 0.006% @ 1V out
- Line Level Inputs: 150mV / 24kOhms
- Output Sensitivity / Impedance: 1V / 100 Ohms
- Bass: +3, +4dB at 100Hz
- Power Consumption: 10 watts
|
|
|
|
RC-1580
- Line Level Inputs: 150mV / 220kOhms
- Phono Overload (MC/MM): 16mV / 160mV
- Bass: +/- 6 cb @ 100 Hz
- Power Consumption: 15 watts
|
|
|
|
RC-971
Preamp, 2 output, THD 0.004%, tone defeat, line only
|
|
|
|
|
|
|
|
|
|
RSP-976
- Depth 12 1/2 in
- Digital Inputs 5 nbr
- Digital Outputs 5 nbr
- Energy Star Model
- Height 4 3/4 in
- Nbr. Of Channels 5.1 nbr
- Optical/Coaxial Inputs 6 nbr
- Width 17 3/8 in
|
|
|
|
|
|
4.33 of 5
4.5 of 5
0 of 5
