|
|
|
|
|
|
|
RA 985 Power Amplifier
The RA-985 is truly a very impressive performance package combining musicality with operational ease.
|
|
|
|
RB 1070
The newest interpretation of a classic Rotel award-winning power amplifier design, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topol-ogy assures the precise interchannel timing clues necessary for pinpoint stereo reproduction. At 130 watts per channel (20 Hz to 20 kHz @ 0.03% THD into 8 ohms), the RB-1070 is more than capable of meeting the challenges of even the least efficient loudspeakers. An internal bridge option provides truly prodigious 390 watt out-put capability. Front panel LED status indicators show power, protection, and bridged mode for instant system analysis. And a separate input and output for 12 volt "trigger" signals increases flexibility by allowing the amplifier to be totally integrated into even the most complex remote-controlled systems.
|
|
|
|
RB 980BX
Discontinued, price may be lower.
120 watt stereo amplifier
|
|
|
|
RB-03
- Damping Factor (8 ohms)
- Input Impedance/Sensitivity 500)
- Input Overload Level)
- Frequency Response 1.0V / 33 kOhms)
- Power Consumption: 250 watts)
- Power Requirements:115 volts, 60 Hz)
- 230 Volts, 50 Hz)
- Weight (net): 8.1kg / 17.86 lbs)
|
|
|
|
RB-1050
70 watts x 2 into 8 ohms, daisy chain link out, input trim, 12V trigger input, signal sensing auto on, detachable power cord
|
|
|
|
RB-1072
- Power Configurations: 2 x 100 watts
- Power Output (4 ohms, 0.09% THD): 190 watts
- Output Peak Current: 11A
- Input Sensitivity / Impedance: 1.25 V / 9.9 k ohms
|
|
|
|
RB-1080
200 watts x 2 into 8 ohms, balanced and unbalanced inputs, 12V trigger input, removeable power cord
|
|
|
|
|
|
|
RB-1091 Monoblock
- Power Configurations (FTC): 1 x 500 Watts
- Power Output (4 Ohms, 0.09% THD): 1000 watts
- Output Peak Current: 40A
- Damping Factor (8 ohms): 400
- Frequency Response: 10 - 40 KHz (±3dB)
|
|
|
|
RB-1092
The RB-1092 is the stereo version of the RB-1091 Class D amplifier. It can generate up to 2 x 500 watts into an 8 ohm load and can drive virtually any pair of loudspeakers to very loud sound pressure
|
|
|
|
RB-1510
- IM Distortion: 0.03%, maximum
- Damping Factor (8 ohms): 200
- Frequency Response (+/-1 dB): 15-50 kHz (+/-1dB)
- Power Consumption: 120 watts
|
|
|
|
RB-1552
- Power Configurations: 2 x 120 watts
- Damping Factor (8 Ohms): 500
- Input Sensitivity / Impedance: 1.0V / 33kOhms
- Frequency Response (+/-1dB): 4 - 100kHz (+0.5dB, -3dB)
- Power Consumption: 400 watts
|
|
|
|
RB-1562
- Input Sens. / Impedance: 1.25V / 8.3 k ohms
- Frequency Response (+/-1 dB): 10 - 40 KHz (+3dB)
- Power Consumption: 130 Watts
|
|
|
|
RB-1572
- Damping Factor (8 ohms): 400
- Frequency Response (+/-1 dB): 10 - 80 kHz (+3dB)
- S/N Ratio (IHF A): 109 dB
- Power Consumption: 280 Watts
|
|
|
|
RB-1582
- Damping Factor (8 Ohms): 1000
- Input Sensitivity / Impedance: 1.5V / 32kOhms
- Frequency Response (+/-1dB): 15-100kHz (+/-1dB)
- Power Consumption Ohms): 550 watts
|
|
|
|
RB-850
50 Watt Stereo Power Amplifer - Bridgeable (1987-1991)
|
|
|
|
|
|
|
RB-971
70 Watt Stereo Power Amplifier
|
|
|
|
RB-976
6 Channel Power Amplifier - 60 Watts
|
|
|
|
RB-981
130 Watt Stereo Power Amplifier
|
|
|
|
RB-985 THX
5 Channel Power Amplifier - 100 Watts (1995-1998)
|
|
|
|
RB-991
3 Channel THX Power Amplifier - 200 Watts
|
|
|
|
RB-993
3 Channel THX Power Amplifier - 200 Watts
|
|
|
|
RKB-250
- Frequency Response: 10Hz-100kHz
- Input Impedance: 20 k Ohms
- Input Sensitivity: 1.0 volt
- S/N Ratio (IHF A): 115 dB
|
|
|
|
RKB-650
- Frequency Response: 15 Hz - 100 kHz (±1dB)
- Damping Factor: 200
- Peak Current: 25 A
- Power Consumption: 450 Watts
|
|
|
|
RKB2100
- Frequency Response: 4Hz-100kHz
- Damping Factor: 200
- S/N Ratio (IHF A): 120 dB
- Crosstalk/Separation: 70 dB
- Power Consumption: 450 Watts
|
|
|
|
RMB-1048
40 watts x 8 into 8 ohms, 12V trigger input, auto on, daisy chain output, front panel level control, internal input link for custom applications, removeable power cord
|
|
|
|
RMB-1066
60 watts x 6 into 8 ohms, 70 watts x 5 into 8 ohms, 150 watts x 3 into 8 ohms, 12V trigger input, auto on, internal input link for custom applications, daisy chain output, input level control, removeable power cord
|
|
|
|
RMB-1075
120W x 5 into 8 ohms, 200W x 5 into 4 ohms, 180 damping factor.
|
|
|
|
RMB-1076
- Power RMS (per channel): 100W
- Amplification Class: Class D
- Analog Audio Inputs: 8 unbalanced/RCA
- Frequency Response: 10Hz - 40kHz ±3dB
- Power Consumption: 300W
|
|
|
|
RMB-1077
- Power Configurations (FTC): 7 x 100 Watts
- Frequency Response: 10 - 80 KHz (±3dB)
- Signal to Noise Ratio (IHF A network): 105 dB
- Power Consumption: 400 Watts
|
|
|
|
RMB-1085
Rotel’s RMB-1085 is a space saving, cool-running and remarkably efficient multichannel class D amplifier. The amplifier supports 5 channels at 100 watts per channel into 8 ohms, all channels driven, at vanishingly low distortion. The RMB-1085 is the ideal amplifier for medium to large home theaters. In an elegant package less than 3” high, it will fit where large conventional amplifiers won’t, and because it produces so little heat, it won’t compromise other components located in the same space. It’s sophisticated power supply and output stages are rock solid even with power fluctuations and complex speaker loads.
|
|
|
|
RMB-1095
High current five channel amplifier
· 200 watts x 5 into 8 ohms
· Detachable power cord
· Two Rotel toroidal transformers
· Balanced and unbalanced inputs
· British slit foil capacitors
|
|
|
|
RMB-1506
- 60 watts x 6 channels high performance audio amplifier
- Audiophile quality analogue amplifier design
- Front panel attenuation control
- Input bussing
- 12 volt trigger, signal sensing
|
|
|
|
RMB-1512
- IM Distortion: 0.03%, maximum
- Input Sens. / Impedance: 1.0V / 33 kohms
- Frequency Response (+/-1 dB): 15-50 khz (+/-1dB)
- S/N Ratio (IHF A): 108dB
|
|
|
|
RMB-1565
- Input Sens. / Impedance: 1.2 V / 8.3 k ohms
- Frequency Response (+/-1 dB): 10 - 80 kHz (+3dB)
- S/N Ratio (IHF A): 109 dB
- Power Consumption: 280 Watts
|
|
|
|
RMB-1575
- IM Distortion: < 0.03%
- Damping Factor (8 ohms): 400
- Frequency Response (+/-1 dB): 10 - 80 kHz (+3dB)
- S/N Ratio (IHF A): 109 dB
- Power Consumption: 600 Watts
|
|
|