|
|
|
|
|
|
|
Aleph 1.2
(each) 200 Watt Power Amplifier - 2-Gain Stage
|
|
|
|
Aleph 3
30 Watt Stereo Power Amplifier - 2-Gain Stage
|
|
|
|
X 150
Gain: 30 db
Frequency response: -0 dB at DC, -3 dB at 100 kHz
Power Output: 150 W maximum @ 1% THD, 1kHz into 8 Ohms (300 W into 4 Ohms)
Maximum Output Voltage: +_ 50V
Maximum Output Current: +_ 20A
Input impedance: 22 kohms balanced
Slew Rate: +_ 50V/uS
Output Noise: 300 uV unweighted 20-20 kHz
Random Noise Floor: approx. 2uV
Dynamic Range: 145 db (random noise floor to peak output)
|
|
|
|
X 250
The amplifier uses ultra matched components in a simple balanced Class A circuit
250 watts per channel in 8 ohms and 500 watts into 4 ohms
|
|
|
|
X 3
150 watts per channel into 8 ohms, all 3 channels driven
|
|
|
|
X1000.5
- Freq. Response: -0 dB at DC, -3 dB
- Power Output: 1000 watts
- Dynamic range: 150dB
- Random noise floor: approximately 2 uV
|
|
|
|
X150.5
- Freq. Response: 0 dB at DC, -3 dB at 100 kHz
- Power Output: 150 watts
- Output Voltage Maximum plus
- Output Current Maximum plus
- Input Impedance: 22 kohm balanced
- Damping factor: 250 ref 8 ohms nominal
|
|
|
|
X250.5
- Freq. Response: 0 dB at DC, -3 dB at 100 kHz
- Power Output: 250 watts
- Output Voltage Maximum plus
- Output Current Maximum plus
- Input Impedance: 22 kohm balanced
- Damping factor: 250 ref 8 ohms nominal
|
|
|
|
X260.5
- Freq. Response: -3dB @1Hz, -3dB @100kHz
- Power Output: 260 watts max.@ 1%THD
- Input Impedance: 22 kohm balanced
- Damping factor: 150 ref 8 ohms nominal
- Output Noise: 200 uV unweighted 20-20 kHz
|
|
|
|
X350.5
- Freq. Response: 0 dB at DC, -4 dB at 100 kHz
- Power Output: 350 watts
- Output Voltage Maximum plus
- Output Current Maximum plus
- Input Impedance: 22 kohm balanced
|
|
|
|
X600.5
- Freq. Response: -0 dB at DC, -3 dB at 100 kHz
- Power Output: 600 watts
- Output Voltage Maximum Plus
- Output Current Maximum Plus
- Input Impedance: 22 kohm balanced
|
|
|
|
XA 160
- Freq. Response: -3 dB at 1.5 Hz, -3 dB
- Power Output: 160 watts
- Output Voltage: Maximum plus
- Random noise floor: approximately 2 uV
- Dynamic range: 154 dB
|
|
|
|
XA 200
- Freq. Response: -3 dB at 1.5 Hz, -3 dB
- Power Output: 200 watts
- Damping factor: 30 ref 8 ohms nominal
- Random noise floor: approximately 2 uV
- Dynamic range: 155 dB
|
|
|
|
XA 30
- Stereo power amplifier
- SuperSymmetry circuit
- Additional power
|
|
|
|
XA 60
- Monoblock power amplifier
- Low-level resolution
- 60 watts rms into 8 ohms
- High current DC reservoir
|
|
|
|
XA100
- Freq. Response: -3 dB at 1.5 Hz, -3 dB at 100 kHz
- Power Output: 100 watts
- Output Voltage Maximum Plus
- Output Current Maximum Plus
- Input Impedance: 22 kohm
|
|
|
|
XA100.5
The XA100.5 Mono amplifiers shows what a grown up Class A amp can do, reproducing everything from intimate acoustic instrumentals to epic crescendos with accuracy and ease, presenting a lifelike soundstage with power to spare. Considered by many to be the epitome of Class A amplification, these 100 watt per channel mono blocks will take any speaker system to new heights of detail and ease.
|
|
|
|
XA160.5
- Low Frequency Response: 1.5 Hz
- High Frequency Response: 100 KHz
- Distortion, (1 KHz, full power): 1%
- Maximum Output (Volts): 52
- Damping Factor: 200
|
|
|
|
XA200.5
- Low Frequency Response: 1.5 Hz
- Power Output /ch (8 ohm): 200
- Distortion, (1 KHz, full power): 1%
- Maximum Output (Volts): 58
- Damping Factor: 200
|
|
|
|
XA30.5
- Design: Two Channel Power Amplifier
- MFR: 1.5 Hz - 100 kHz
- Sensitivity: 0.77 V for Full Output
- Input Impedance: 30 kOhms
- Damping Factor: 150
|
|
|
|
XA60.5
Our most affordable Class “A” mono block. Offering double the output of the XA30.5 in a single-ended design. Two chassis means independent power supplies for each unit, increasing power and reducing channel noise. Incorporating improved power supplies, filtering, and layout updates from the XA.5 update, the XA60.5 will drive most stereo systems, including difficult low impedance loads. Transients, sound staging, and noise are improved from the XA30.5.
|
|
|