|
|
|
|
|
|
|
2125
- 125 watts rms per channel
- 35 amps peak current per channel
- Rear mounted gain controls
- 2u chassis; RMK22 rack mount kit
- 5-way speaker terminals
- Efficient, low heat design
|
|
|
|
2250
- THX Ultra II certified
- 700 watts bridged into 8 or 4 ohms mono
- 45 amps peak current per channel
- 18dB/octave high pass filter
- Rear mounted gain controls
- A/B speaker terminals
|
|
|
|
275
- 30 amps peak current per channel
- A/B speaker terminals
- 115/230v selector on rear panel
- Fully discrete circuitry
- Efficient, low heat design
- High temperature indicators
|
|
|
|
5125
- 185 watts rms per channel
- 35 amps peak current per channel
- Automatic on/off by audio signal
- 5-way speaker terminals
- Efficient, low heat designt
|
|
|
|
5250
- 250 watts rms per channel
- 45 amps peak current per channel
- Efficient,low heat design
- 5-wayspeaker terminals
- High temperature indicators
- Fullydiscrete circuitry
|
|
|
|
5250 5-Channel Amplifier
The THX Ultra2 certified Model 5250 five-channel home theater power amplifier is the most powerful member of the NewClassic line of high-end home theater products. Each of this cool-running power amplifier's five channels can deliver 250 watts into 8 ohms, and 385 watts into 4 ohms. Designed for efficient, low heat operation, this Class AB Amplifier features fully discrete circuitry with two toroid transformers, and is capable of delivering 45 amps peak current per channel.
|
|
|
|
Halo A 23
125W x 2 into 8 ohms, 200W x 2 into 4 ohms, 400W x 1 into 8 ohms, high bias Class A/AB amplification, MOSFET driver stage, JFET input stage, balanced XLR inputs, no capacitors or inductors in signal path, rear mounted gain controls, ground lift switch.
|
|
|
|
Halo A21
Halo A21 Two-Channel Amplifier
Continuous power output (20 Hz - 20 kHz): 250 watts RMS x 2 at 8 ohms, 400 watts RMS x 2 at 4 ohms, 750 watts RMS x 1 (bridged mono mode) at 8 ohms
Current capacity: 60 amperes peak per channel
Power bandwidth: 5 Hz - 100 kHz, +0/-3 dB at 1 watt
Total harmonic distortion: < 0.2 % at full power
IM distortion: < 0.04 %
Slew rate: >130 V / µsecond
Dynamic headroom: > 1.5 dB
Interchannel crosstalk: > 80 dB at 1 kHz; > 63 dB at 20 kHz
Input sensitivity: 1 V for 28.28 V, THX Reference Level
Input impedance: 33 k ohm unbalanced; 66 k ohm balanced
S/N ratio: > 112 dB, input shorted, IHF A-weighted
Damping factor: > 1100 at 20 Hz
Voltage: 110V – 120V
Dimensions: 17.25" wide, 7.625" high (7" without feet), 19.12" deep
Net weight: 60 lbs.
Manufacturer''s limited warranty: 10 years parts, 5 years labor
|
|
|
|
Halo A51
Halo A51 Five-Channel Amplifier
Power output: 250 watts RMS x 5 continuous, 20 Hz - 20 kHz at 8 ohms; 400 watts RMS x 5 continuous, 20 Hz - 20 kHz at 4 ohms
Current capacity: 60 amps peak per channel
Frequency response: 5 Hz - 100 kHz, +0/-3 dB at 1 watt
Total harmonic distortion: <0.2% at full power, <0.03% at typical listening levels
IM distortion: <0.04%
TIM: Unmeasureable
Signal-to-noise ratio: >112 dB, input shorted, IHF A-weighted; 102 dB, input shorted, unweighted
Dynamic headroom: >1.5 dB
Interchannel crosstalk: >78 dB at 1 kHz, >63 dB at 20 kHz
Input impedance: unbalanced 47 K ohm, balanced 94 K ohm
Input sensitivity (for 28.28 V output into 8 ohm): unbalanced 1 V, balanced 1 V per leg
Slew rate: >130 volts per microsecond
Damping factor: >1100 at 20 Hz
DC trigger requirements: +9 VDC to +12 VDC, 2 mA
Audio trigger requirements: 50 mV AC - 250 mV AC
Power consumption: standby, 25 watts; full power into 4 ohms, 3000 watts
Weight: 77 lbs.
Shipping weight: 92 lb.
Dimensions: 17.5" wide, 20" deep, 7" high (7.625" with feet)
Manufacturer''s limited warranty: 10 years parts, 5 years labor
|
|
|
|
Halo A52
Halo A52 Five-Channel Amplifier
Continuous power output: 125 watts RMS x 5, 20 Hz - 20 kHz, 8 ohms, all channels driven; 225 watts RMS x 5, 20 Hz - 20 kHz, 4 ohms, all channels driven
Current capacity: 30 amperes peak per channel
Power bandwidth: 5 Hz - 100 kHz, +0/-3 dB at 1 watt
Total harmonic distortion: < 0.2 % at full power
Interchannel crosstalk: > 78 dB at 1 kHz; > 63 dB at 20 kHz
Input sensitivity: 1 V for 28.28 V, THX Reference Level
S/N ratio: > 113 dB, input shorted, IHF A-weighted
Damping factor: > 1000 at 20 Hz
Dimensions: 17.25" wide, 5.875" high (5.25" without feet), 19.75" deep
Net weight: 67 lbs.
Manufacturer''s limited warranty: 10 years parts, 5 years labor
|
|
|
|
HCA 1000A
This John Curl-designed amplifier brings out all the subtle details of your music, yet still has the punch for the boldest crescendos and home cinema special-effects explosions. It also features automatic turn-on, making it ideal for home theaters and custom, multi-zone installations.
|
|
|
|
|
|
|
HCA-1205A
5-Channel Power Amplifier - 140 Watts
|
|
|
|
HCA-1206
6 Channel THX Certified Power Amplifier - 135 Watts
|
|
|
|
|
|
|
HCA-2200II
250 watts per channel at 8 Ohm, 400 watts per channel at 4 Ohm, 800 watts bridged into 8 Ohm for monoblock - Performance: 90 amps peak current per channel - Balanced XLR inputs - Less than 0.02% THD
|
|
|
|
|
|
|
HCA-3500
Power Amplifier - 350W x2 Channels
|
|
|
|
HCA-4012A
12 Channel Power Amplifier - 400 Watts
|
|
|
|
HCA-806
6 Channel Power Amplifier - 80 Watts
|
|
|
|
HCA-855A
85 watts RMS x 5 at 8 ohms
125 watts RMS x 5 a 4 ohms
5 Hz-100 kHz, +0/-3 dB at 1 watt
115 dB, full power, IHF A-weighted
41 pounds
|
|
|
|
JC-1
JC-1 400-Watt Mono Amplifier
Continuous power output 20 Hz- 20 kHz: 400 watts RMS x 1, 8_; 800 watts RMS x 1, 4_; 1200 watts RMS x 1, 2_
Class A power output, 20Hz – 20 kHz: 25 watts, bias set to high, 8_; 10 watts, bias set to low, 8_
Current capacity: 135 amperes peak
Power bandwidth: 2 Hz - 120 kHz, +0/-3 dB at 1 watt
Total harmonic distortion: < 0.15 % at full power
IM distortion: < 0.03 %
Slew rate: >130 V/µsecond
Dynamic headroom: > 1.8 dB
Input sensitivity: 1 V for 28.28 V output, THX Reference Level
Input impedance: 100 k ohm
S/N ratio: >120 dB, IHF A-weighted, bias set to high; >122 dB, IHF A-weighted, bias set to low
Damping factor: > 1200 at 20 Hz
Power requirement: 250 watts, idle; 1280 watts, full power into 4 ohm
DC trigger output capacity: +12 Vdc, 150 mA
Dimensions: 17-1/4" w x 7-5/8" h x 20" d, 7" h without feet
Net weight: 64 lbs.
Manufacturer''s limited warranty: 10 years parts, 5 years labor
|
|
|
|
Zamp v.3
- Removable IEC power cord
- Rear-panel 12 Volt trigger input and output
- Line-level inputs and outputs
- Front panels EIA rack mounting holes
|
|
|
|
Zamp v2
30W x 2 into 8 ohms, 45W x 2 into 4 ohms, 75W x 1 into 8 ohms, gain controls and bridge switch on rear panel, headphone jack, 12 volt DC auto turn-on trigger circuitry, ground lift switch, 9.5" width front panel.
|
|
|
|
|
|