AT-8500

• 8"aluminum/titanium/urethane cone
• Frequency Response: 30Hz-21kHz +/-3dB
• Recommended Amplifier Power: 20 to 200 watts
• Sensitivity: 89 dB

MSRP:
$773.00 Product Rating:
  0 of 5

 AT5

• Infinite baffle design
• 1" Teteron tweeter
• 5-1/4" carbon/glass fiber woofer
• Frequency response 60Hz-21kHz +/-3dB
• Sensitivity: 88dB for 2.83V pink noise

MSRP:
$324.00 Product Rating:
  0 of 5

 AT8200

• Frequency Response: 30Hz-21kHz +/-3dB
• Recommended Amplifier Power: 20 to 200 watts
• Sensitivity: 89 dB
• 8"aluminum/urethane cone

MSRP:
$593.00 Product Rating:
  0 of 5

 CM5MP
These multipurpose ceiling-mount speakers give you great sound while leaving your walls and floors free for your furnishings. Rustproof aluminum grilles and moisture- and UV-resistance makes the CM5MP speaker as good a choice for a protected patio or shower as it is for halls, bedrooms, or a kitchen!

Each CM5MP speaker features a 5-1/4" talc-filled polypropylene woofer, for satisfyingly full lows. The 3/4" ultra-wide dispersion Kaladex tweeter pivots up to 20 degrees, so you can aim the sound toward your listeners. Baffle-mounted bass and treble adjustment switches give the speakers even more flexibility by letting you fine-tune the sound after the speakers are installed.

Key Features:

• 5-1/4" woofer
• 3/4" Kaladex tweeter
• tweeter pivots up to 20 degrees
• recommended amplifier power: 5 to 60 watts
• frequency response 75-20,000 Hz (±4dB)
• sensitivity 90 dB
• 6-ohm impedance
• dimensions: 8-1/4" diameter
• cutout dimensions: 7-1/16" diameter
• depth above ceiling: 4-3/4" (assumes 1/2" sheetrock)
• spring-loaded push terminals (accomodate 12- to 20-gauge speaker wire)
• rustproof aluminum grilles
• moisture- and UV-resistant
• white finish
• easy-flip tab mounting system
• warranty: 5 years

MSRP:
$225.00 Product Rating:
  0 of 5

 CM6-Fx

• Impedance: 6 ohms
• Recommended amplifier power: 10W to 150W
• Frequency response: 50 Hz - 21 kHz +/- 3dB
• Impedance: 6 ohms

MSRP:
$369.00 Product Rating:
  0 of 5

 CM6.3SI
Looking for stereo sound from a single speaker? Check out the Niles Audio Stereo Input line. The ceiling-mounted 6.3Si comes with dual 3/4" Kaladex tweeters and a 6-1/2" mica-filled polypropylene woofer with rubber surround you enjoy pleasing stereo sound, whether in a small space that can't accommodate two speakers (like a powder room) or a larger space where a stationary "sweet spot" is impractical (such as a porch or hallway). Dual no-strip speaker wire terminals make for easy connection to your system.

Key Features:

• 6-1/2" woofer
• 3/4" Kaladex tweeters
• recommended amplifier power: 5 to 100 watts
• frequency response 60-21,000 Hz (±3dB)
• sensitivity 88 dB
• dimensions: 9-1/4" diameter
• cutout dimensions: 8-1/16" diameter
• depth above ceiling: 4-11/16" (assumes 1/2" sheetrock)
• patented 2-piece, no-strip speaker wire terminals (accomodate 12- to 20-gauge speaker wire)
• paintable, rustproof, white-finish aluminum grilles; ideal for moist environments
• warranty: 5 years

MSRP:
$94.00 Product Rating:
  4 of 5

From 1 members

 CM650BG Background Music Ceiling-Mount Speakers

MSRP:
$199.95 Product Rating:
  0 of 5

 CM650MP Ceiling-Mount Speakers

MSRP:
$299.95 Product Rating:
  0 of 5

 CM6HD

• 6-1/2" injection-molded TCC (talc-, carbon-, and ceramic-filled) polypropylene woofer with butyl rubber surround
• 1" fluid-cooled, ultra-wide dispersion Teteron trilaminate tweeter in custom pivoting enclosure
• tweeter pivots up to 20 degrees
• baffle-mounted bass and treble adjustment switches
• selectable 4- or 8-ohm impedance
• moisture- and UV-resistant
• white finish
• easy-flip tab mounting system
• recommended amplifier power: 10 to 125 watts
• frequency response 50-21,000 Hz (±3dB)
• sensitivity 89 dB
• dimensions: 9-1/4" diameter
• cutout dimensions: 8-1/16" diameter
• depth above ceiling: 4-11/16" (assumes 1/2" sheetrock)
• optional mounting bracket required for new construction

MSRP:
$25.00 Product Rating:
  0 of 5

 CM6PR

• Frequency Response: 60Hz-20kHz
• Impedance: 4 or 8 Ohms
• Pivoting Tweeter Mount
• Recommended amplifier power: 10-125 Watts
• Sensitivity: 89dB
• Mounting Depth: 3.375 Inches

MSRP:
$369.00 Product Rating:
  0 of 5

 CM76 Round Flush-Mount Ceiling Speakers

MSRP:
$149.95 Product Rating:
  4.5 of 5

From 2 members

 CM8.5SI
Sometimes, the ceiling of a small room (like a bathroom or walk-in closet) just doesn't have room for two speakers; or you want sound in a space like a hallway or porch, where there's no stationary sweet spot. Niles Audio offers a solution — the CM8.5Si stereo input speaker! This handy speaker partners dual 3/4" fluid-cooled, ultra-wide dispersion, trilaminate Teteron® tweeters with a 8" mica-filled polypropylene woofer with rubber surround. No more hearing the singer's voice at one end of the hallway, and the guitar at the other end! Instead, you enjoy precise, pleasing stereo audio.

You'll also appreciate the advanced crossover network with bass and treble tone controls — you get better control of your upper and lower frequencies, for more accurate sound. Dual no-strip speaker wire terminals make for easy connection to your system.

• 8" woofer
• 3/4" fluid-cooled Teteron tweeters
• bass and treble tone controls
• recommended amplifier power: 10 - 150 watts
• frequency response 45-21,000 Hz (±3dB)
• sensitivity 90 dB
• dimensions: 10-11/16" diameter
• cutout dimensions: 9-9/16" diameter
• depth above ceiling: 5" (assumes 1/2" sheetrock)
• patented 2-piece, no-strip speaker wire terminals (accomodate 12- to 20-gauge speaker wire)
• paintable, rustproof, white-finish aluminum grille; ideal for moist environments
• warranty: 5 years

MSRP:
$222.00 Product Rating:
  0 of 5

 CM8SW

• 8" TCC (talc-, carbon- and ceramic-filled) dual voice coil woofer
• adjustable crossover with baffle-mounted control
• high-pass filter with baffle-mounted control
• dual patented two-piece, no-strip speaker wire terminals (accommodate 12- to 20-gauge wire)
• MicroPerf™ rustproof aluminum grille
• recommended amplifier power: 10 to 150 watts
• frequency response: 35Hz-140Hz (±3dB)
• sensitivity: 90dB
• round, white, paintable grille
• easy flip tab mounting system
• dimensions: 10-3/4" diameter
• cutout dimensions: 9-1/2" diameter
• depth behind ceiling: 4" (assumes 1/2" sheetrock)

MSRP:
$279.00 Product Rating:
  0 of 5

 DS6.3

• Injection-molded 6 1/2 inch
• Frame/Pivoting Mechanism Injection
• Bumpback Woofer Magnet Tweeter
• 1 fluid-cooled ultra-wide dispersion
• Moisture/Weather Resistance Moisture/UV resistant

MSRP:
$155.00 Product Rating:
  0 of 5

 DS6.7

• 6-1/2” talc-filled polypropylene woofer
• Rubber surround
• 1" fluid-cooled ultra-wide dispersion soft dome
• 1" Teteron tri-laminate tweeter
• 6-1/2” injection molded

MSRP:
$441.00 Product Rating:
  0 of 5

 DS8.5

• Frequency Response 38Hz-22kHz
• Impedance 4 or 8 Ohms
• Pivoting Tweeter Mount
• Recommended amplifier power 10-150 Watts
• Sensitivity 89dB
• Mounting Depth 5.88

MSRP:
$459.00 Product Rating:
  0 of 5

 HD-CTR
The Niles High Definition CTR center channel in-wall speaker is the perfect choice for your in-wall home theater system. It mounts flush and delivers stunning sound.

This is one of the most advanced center channel speakers we've seen. Movie soundtracks are mastered with overenhanced high frequencies to compensate for theater speakers being placed behind the screen (if you've ever thought movies sound unnaturally crisp at home, that's why). The HD-CTR has two switches to compensate for that mastering process and to give you dialog that's easier to understand. There is a Treble Cut switch that reduces the highs by 3dB, and a Dialog Enhancement switch that makes the dialog itself more intelligible.

Key Features

• Two 5-1/4" long-throw woofers with mica-filled polypropylene cones and butyl rubber suspensions
• 1" fluid-cooled ElastoDynamicT® dome tweeter
• Directed Sound Field Geometry
• Crossover-mounted DSFG Defeat Switch
• Baffle-mounted Treble Cut Switch (3dB)
• 12 AWG spring-loaded push terminals placed for easy one hand installation
• Recommended amplifier power: 10 to 150 watts
• Frequency response: 45Hz to 21,000Hz, +/-3dB
• Sensitivity: 90dB
• Impedance: 8 Ohms
• Cutout dimensions: 7-1/8" x 13-1/4"
• Depth required: 3-1/8"
• Overall Finished Exterior Frame Dimensions: 8-1/4" x 14-1/2"

MSRP:
$169.00 Product Rating:
  0 of 5

 HD525RP High Definition Flush-Mount In-Wall Speakers

MSRP:
$329.95 Product Rating:
  0 of 5

 HD650RP High Definition Flush-Mount In-Wall Speakers

MSRP:
$399.95 Product Rating:
  0 of 5

 HD8.3

• Low-diffraction tweeter- adjustment mechanism
• Recommended amplifier power: 10W to 150W
• Frequency response: 40Hz-21kHz +/-3dB
• Sensitivity: 91dB for 2.83V pink noise
• 4-ohm impedance

MSRP:
$389.00 Product Rating:
  0 of 5

 HD8R
Niles®'s High Definition HD8R in-wall speakers deliver beautiful sound with bass response all the way down to 40 Hz. And since they mount inside your walls, they won't take up any floor space! This model features an 8" injection-molded TCC (talc, carbon, and ceramic) polypropylene woofer and a 1" Teteron® tri-laminate tweeter, mounted on a rigid baffle reinforced with anti-resonant wave bracing to reduce sound-muddying vibrations. If you're planning a whole-house audio system, or prefer a stealthy installation in your main listening room, these speakers provide a great-sounding (and great-looking) solution.

The HD8R in-wall speakers use a quick and easy mounting system. They include everything you'll need (except speaker wires) to install them in your walls. The grilles are paintable, making it easy to blend the speakers into your decor.

Key Features:

• 8" injection-molded TCC (talc, carbon, and ceramic-filled) poly woofers
• 1" Teteron tri-laminate tweeter
• front-mounted bass and treble controls
• IR sensor knockout
• 100% aluminum grilles will not rust
• frequency response 40-21,000 Hz (ñ3dB)
• 6-ohm impedance
• handles from 10 to 150 watts
• depth behind wall: 3-5/8" (with 1/2" drywall)
• frame dimensions: 10-3/16" x 14-1/4"
• hole cutout dimensions: 9-1/8" x 13-1/8"
• warranty: 5 years

MSRP:
$350.00 Product Rating:
  0 of 5

 MP5R

• moisture-resistant construction
• IR sensor knockout compatible with Niles IR remote sensors
• frequency response: 75-20,000 Hz (ñ3 dB)
• recommended amplifier power: 5 to 60 watts
• 8-ohm impedance
• depth behind wall: 3-5/8" (assumes 1/2" drywall)
• frame dimensions: 7-1/8" x 9-7/8"
• hole cutout dimensions: 6-1/4" x 9"

MSRP:
$199.00 Product Rating:
  0 of 5

 MP6R
Great sound doesn't have to mean large, boxy speakers, wire tucked under a rug or taped to a baseboard, and furniture arranged around your stereo system. Niles® in-wall speakers let you enjoy great-sounding music without rearranging your decor and lifestyle.

The Niles® Multipurpose MP6R feature 6-1/2" talc-filled polypropylene woofers with treated foam surrounds and 3/4" Kaladex® tweeters. The baffle is made of ABS plastic with anti-resonant wave bracing. The result is clean, accurate sound.

Key Features:

• moisture-resistant construction
• IR sensor knockout is compatible with Niles IR remote sensors
• frequency response 65-20,000 Hz (ñ3 dB)
• recommended amplifier power: 5 to 75 watts
• 8-ohm impedance
• depth behind wall: 3-5/8" (assumes 1/2" drywall)
• frame dimensions: 8-3/4"" x 11-11/16"
• hole cutout dimensions: 7-5/8" x 10-5/8"
• warranty: 5 years

MSRP:
$270.00 Product Rating:
  0 of 5

 Music Anywhere! Kit - In-Wall Speakers

MSRP:
$329.00 Product Rating:
  0 of 5

 Niles CM76/2 Pair
5.25" In-Ceiling Speakers 5-1/4" woofers, frequency response 63-20,000 H

MSRP:
$149.00 Product Rating:
  0 of 5

 Niles HD8R Pair
In-wall Speakers/Grilles/Frames/Brackets Two-way design w/ 8" woofers, frequency response 40-21,000 Hz, IR sensor knockout, moisture-resistant

MSRP:
$649.00 Product Rating:
  0 of 5

 PR6

• Recommended amplifier power 10W to 100W
• Frequency response: 60Hz-20kHz +/-3dB
• Sensitivity: 89dB for 2.83V
• Anti-resonant wave- bracing technology

MSRP:
$199.00 Product Rating:
  0 of 5