|
|
|
|
|
|
|
1259
DIY 12" subwoofer driver
|
|
|
|
Classic 12
12" subwoofer, alum cone, rubber surround, 250 watt amplifier
|
|
|
|
|
Sub One
10" Driver - 250 Watt Sunfire Amp/Separate contoller
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SubOnei
The SubOnei employs a long throw 12" woofer driven by a powerful 250-Watt high efficiency amplifier offering solid low end performance down to 25Hz.
The exceptional performance of the SubOnei is enhanced with NHT's outboard subwoofer controller.
Connected to the SubOnei by a high quality, line level cable, the controller allows the listener to adjust bass response and volume, as well as audio/video contour for music or movie use. The controller also offers the flexibility of continuously variable low pass settings and adjustable high pass and phase settings.
|
|
|
|
|
|
|
|
SW10
NHT POWERED SUBWOOFER 150 WTS 10'''' => Model SW-10
|
|
|
|
|
SW10
An ideal match for any SuperAudio loudspeaker system in any channel configuration, the compact SW10 powered subwoofer is articulate and musical, yet never short in the dynamic output necessary for movie soundtracks.
Employing a 10" long throw woofer with a built-in 150 watt amplifier, the SW10 delivers bass down to 31Hz from a cabinet just 14.5" square. It offers a variety of inputs for flexible connection to any entertainment system, plus controls for setting phase and volume, and also features NHT's proprietary audio/video contour circuitry to allow simple adjustment for optimum performance for either music or movies.
|
|
|
|
SW10ii
NHT’s new powered subwoofer, the SW10ii is designed to visually complement the Super Audio loudspeaker series and offers performance suitable for any subwoofer application. The SW10ii features a 10” aluminum cone woofer mated with a built-in150w, amplifier in a vented design. The aluminum cone is attached to an aluminum former acting as a heat sink reducing heat build up and keeps distortion low. The amplifier allows a variety of connection methods and offers NHT’s unique “boundary” control which maintains flat response regardless of placement. The SW10ii is designed for small to medium size rooms and is available in high gloss black only.
|
|
|
|
|
SW12
- 250-watt amp
- 12" front-firing aluminum cone woofer
- frequency response 27-180 Hz (±3dB)
- continuously variable 40-180 Hz low-pass crossover
- speaker-level and line-level inputs
- dedicated LFE input and output
- phase switch
- bass-reflex design
- high-gloss black lacquer finish
- subwoofer: 13-1/2"W x 20"H x 15"D
|
|
|
|
|
|
|
|
SW2Si
The SW2Si is a slave subwoofer enclosure employing a 10" woofer for use with the SA-2 amplifier.
|
|
|
|
|
SW3S
The SW3S is a slave subwoofer enclosure employing a 12" woofer for use with the SA-3 amplifier.
|
|
|
|
U1
The entire U1 system consists of three electronically matched components: the W1 subwoofer enclosure with dual bass drivers, an A1 monaural amplifier, and an X1 Active Crossover.
|
|
|
|
U2
The entire U2 system consists of four matched components: two W2 subwoofer enclosures with individual bass drivers, the A1 Monaural Amplifier, and the X1 Active Crossover.
The W2 cabinets feature 12" woofers in compact 14" cubes, each delivering bass
|
|
|
5 of 5
0 of 5
