|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A3.2
- 100 watts per channel into 8 Ohms
- 170 watts per channel into 4 Ohms
- MC/MM phono input standard
|
|
|
|
A3.5
- 240 Watts per channel
- Dual mono circuitry
- Excellent technical performance with low feedback
- High power and high peak current
|
|
|
|
A300
150W per channel at 8 ohms or 250W per channel at 4 ohms.
Separate power supplies for the amplifier and preamplifier sections.
Separate power transformers for each channel.
|
|
|
|
A308
- Powerful high current design
- 48 amps peak to peak current delivery
- Moving magnet and moving coil phono stage
- Fully dual mono circuit topology for better transient attack
- Sophisticated circuit design resulting in exceptionally low distortion
- Separate transformer windings for the preamp stage
- Huge power supply and sturdy chassis
|
|
|
|
A5
The A5 has 250 wpc and is capable of reproducing proper dynamic range into all but the most inefficient loudspeakers. It has fabulous technical performance and a delicate neutral sound which belies its great muscle power potential. The A5 sounds rather like a super quality tube amplifier but with guts and proper dynamic range.
|
|
|
|
B1
- Power output per channel at 8 Ohms, <1%THD: 35 watts
- Phono MC: 200µV
- Phono MM: 2mV
- Line inputs & Sensitivity: 200mV CD, Tuner, CDV, Tape 1, Tape 2
|
|
|
|
kW 500
- Vacuum tubes in the preamp stage
- Unique 6112 mu-vista tube
- A mil-spec built for ultra-high reliability and long life
- Iron-fisted control
- Separate chassis matching
|
|
|
|
Nu-Vista M3
Power output: 250 watts per channel @ 8 ohms
Dual mono power amplifiers
Inputs: Five line plus MM phono
Full remote control
|
|
|
|
Tri-Vista 300
- Voltage RMS 53 Volts 20Hz to 20kHz
- Peak 150 Volts
- Power 350 Watts per channel into 8 Ohms
- 600 Watts per channel into 4 Ohms
- Peak-to-peak output current 96 Amps
- Damping Factor 210
- Output devices per channel 8
- Pre-output impedance 50 Ohms
|
|
|
|
X-150
- 75 watts per channel into 8 Ohms
- Doubling to 150 watts into 4 Ohms
- 75 Amps of peak current delivery
- 0.01% distortion
- Highly linear +/- 0.5db 20Hz - 20kHz response
|
|
|
|
X-80
- 40 watts per channelD
- Delivers loads of peak current
- Low output impedance
- Uses a conventional, motorised, analogue volume control
|
|
|
|
|
|
|
X-A100R
- Increased output power
- Passive bi-amping
- High current output stage
- 75 watts per channel, 8 Ohms power output
|
|
|
|
X-A200R
- Increased output power
- Passive bi-amping
- Power consumption: 400 watts
- Input sensitivity: 300mV
|
|
|
|
X-T100
The X-T100 is based around exactly the same concepts as used in our super-integrated series (Nu-Vista M3, Tri-Vista 300, kW500 and kW550). Not surprisingly, even though it has much less power, the sound quality is almost indistinguishable from its illustrious siblings. The X-T100 is true budget esoterica. Pair it with the right sort of loudspeakers and you really can get a true high end sound. It's not surprising really because all the concepts behind the X-T100 and the circuitry employed are exactly the same as on our most expensive amplifiers. This puppy has to be heard to be believed.
|
|
|
|
XA-2
75 watts/channel integrated amplifier
|
|
|