|
|
|
|
|
|
|
evolution 402
Stereo amplifier 400 watts per channel with cast , large 5000va power supply. Active Cascode Topology eliminates global negative feedback, only nested local feedback is employed around individual gain blocks. The result is an extraordinarily open, liquid, effortless sound.
The signal path incorporates Krell Current Mode and CAST circuitry using proprietary multiple-output current mirrors in a complementary and balanced arrangement for extraordinary open loop linearity.
Evolution circuit topology breaks through bandwidth limitations of conventional designs resulting in near perfect performance in the audible range.
|
|
|
|
FPB 400cx
- Frequency response 20 Hz to 20 kHz,+0 dB, -0.05 dB 0.1 Hz to 240 kHz, +0 dB, -3 dB
Gain 26.4 db
- Input Impedance 100 kohms
- Input Sensitivity 2.71 Vrms
|
|
|
|
FPB 450Mcx
- Frequency response 20 Hz to 20 kHz, +0 dB, -0.05 dB 0.1 Hz to 240 kHz, +0 dB, -3 dB
Gain 26.4 dB
- Input Impedance 100 kohms
- Input Sensitivity 2.87 Vrms
|
|
|
|
FPB 700cx
- Frequency response: 20 Hz to 20 kHz, +0 db, -3 db
- THD: 1 kHz <0.03%
- Input impedance: 100 ohms
- Dimensions: 19" W × 10.3" H × 25.5" D
|
|
|
|
FPB 750Mcx
- Frequency response 20 Hz to 20 kHz, +0 dB, -0.05 dB 0.1 Hz to 240 kHz, +0 dB, -3dB
Gain 26.4 dB
- Input Impedance 100 kohms
- Input Sensitivity 3.71 Vrms
|
|
|
|
FPB-200
2 channel, 200W at 8 ohms, power doubles each halving of impedance load
|
|
|
|
FPB-300
2 channel, 300W at 8 ohms, power doubles each halving of impedance load
|
|
|
|
FPB-600
2 channel, 600W at 8 ohms, power doubles each halving of impedance load
|
|
|
|
Full Power Balanced 200c
The Full Power Balanced 200c Stereo Power Amplifier is designed for the audiophile who wants the ultimate sound quality from a stereo amplifier with power capabilities of 200 Watts per channel into 8 Ohm, 400 Watts per channel into 4 Ohm, and 800 Watts per channel into 2 Ohm loudspeaker loads. - Fully balanced circuitry from input to output insures signal integrity, rejects noise, and improves signal-to-noise ratios to deliver a ""night and day"" sonic difference when compared to typical single-ended circuitry. - Computer regulated power supply provides consistent sound quality at wide dynamic range regardless of fluctuating line voltages. - Current mode operation ensures wide bandwidth and accurate harmonic reproduction for lifelike sound reproduction. - Class A operation to full rated output redistributes minor distortion by-products and delivers clear transient sounds and harmonically correct overtones. - Proprietary Krell output and driver transistors assure substantial output current capability.
|
|
|
|
Full Power Balanced 250Mc
The Full Power Balanced 250Mc Power Amplifier is designed for the demanding audiophile who prefers monaural operation and the home theater enthusiast who wants superior sound and system flexibility. It is an ideal amplifier for those who appreciate the special appeal of monaural power amplification and want the sonic advantages that Krell Full Power Balanced technology provides. - Substantial Class A power output of 250 Watts into 8 Ohms, 500 Watts into 4 Ohms, and 1000 Watts into 2 Ohms assures tremendous reserves of dynamic headroom for the reproduction of any source material. - Available individually, in symmetrical pairs, and in three-piece and five-piece groupings to best address application needs. - Fully active regulation via microprocessor based regulators for precise control of bias circuits during fluctuating voltage conditions produce consistent sound regardless of power conditions. - Balanced and single-ended operation allows maximum flexibility for hook-ups with other equipment. - Proprietary Krell output and driver transistors assure substantial output current capability.
|
|
|
|
Full Power Balanced 300c
The Full Power Balanced 300c Stereo Power Amplifier is designed for the audiophile who wants the ultimate sound quality from a stereo amplifier with power capabilities of 300 Watts per channel into 8 Ohm, 600 Watts per channel into 4 Ohm, and 1200 Watts per channel into 2 Ohm loudspeaker loads. - Fully balanced circuitry from input to output insures signal integrity, rejects noise, and improves signal-to-noise ratios to deliver a ""night and day"" sonic difference when compared to typical single-ended circuitry. - Computer regulated power supply provides consistent sound quality at wide dynamic range regardless of fluctuating line voltages. - Current mode operation ensures wide bandwidth and accurate harmonic reproduction for lifelike sound reproduction. - Class A operation to full rated output redistributes minor distortion by-products and delivers clear transient sounds and harmonically correct overtones. - Proprietary Krell output and driver transistors assure substantial output current capability.
|
|
|
|
Full Power Balanced 350Mc
The Full Power Balanced 350Mc Monaural Power Amplifier delivers Class A power: 350 Watts into 8 Ohm, 700 Watts into 4 Ohm, and 1,400 Watts into 2 Ohm loudspeaker loads. It offers high power and Krell Full Power Balanced sound quality for high-end two channel as well as high-end multi-channel sound system applications. The substantial current capability of the Full Power Balanced 350Mc provides significant headroom for large loudspeakers, subwoofers, and systems with low sensitivity. - Krell Class A, direct coupled, balanced circuitry provides outstanding musical reproduction. - Dual gold plated output terminals facilitate bi-wire connections security and ease. - Computer regulated power supply provides consistent sound quality at wide dynamic range regardless of fluctuating line voltages. - Remote power turn on/off capability means convenient system operation. - Krell output and driver transistors assure substantial output current capability and audiophile grade sound quality. - Available individually, in symmetrical pairs, and in three-piece and five-piece groupings to best address application needs.
|
|
|
|
Full Power Balanced 600c
The Full Power Balanced 600c Stereo Power Amplifier is designed for the audiophile who wants the ultimate sound quality from a stereo amplifier with power capabilities of 600 Watts per channel into 8 Ohm, 1200 Watts per channel into 4 Ohm, and 2400 Watts per channel into 2 Ohm loudspeaker loads. - Fully balanced circuitry from input to output insures signal integrity, rejects noise, and improves signal-to-noise ratios to deliver a ""night and day"" sonic difference when compared to typical single-ended circuitry. - Computer regulated power supply provides consistent sound quality at wide dynamic range regardless of fluctuating line voltages. - Current mode operation ensures wide bandwidth and accurate harmonic reproduction for lifelike sound reproduction. - Class A operation to full rated output redistributes minor distortion by-products and delivers clear transient sounds and harmonically correct overtones. - Proprietary Krell output and driver transistors assure substantial output current capability.
|
|
|
|
Full Power Balanced 650Mc
The Full Power Balanced 650Mc Power Amplifier providesmonumental power output of 650 Watts into 8 Ohm, 1300 Watts into 4 Ohm, and 2600 Watts into 2 Ohm loudspeaker loads. It is built in limited quantities and by special order. - Krell Current Mode circuitry provides a seamless gain stage transition, wide bandwidth and a heightened level of sonic detail and transparency, with all the smoothness of natural music. - Krell Class A, direct coupled, balanced circuitry provides outstanding musical reproduction. - Dual toroidal power transformers give maximum power to the regulated supplies for unrivaled instantaneous power delivery. - Available individually, in symmetrical pairs, and in three-piece and five-piece like groupings to best address application needs. - Seven-stage Sustained Plateau Bias II delivers precise Class A power into any impedance at any level to optimize every speakers performance. - Proprietary Krell output and driver transistors assure substantial output current capability.
|
|
|
|
KAV-150a
Stereo Power Amplifier - 150w x2 Channel into 8 Ohms - Stereo or Monaural Capability - Balanced and Single-Ended Inputs
|
|
|
|
KAV-2250
The elegant Krellcoat exterior hides the powerhouse that resides within this amplifier. Refined reproduction and overwhelming power defines the KAV-2250. Utilizing technology developed in the Krell Full Power Balanced amplifiers including oversized power supplies, Krell Current Mode circuitry, and balanced signal paths, this amplifier is ideal for use in stereo music and movie soundtrack reproduction.
|
|
|
|
|
|
|
|
|
|
KAV-3250
The elegant Krellcoat exterior hides the powerhouse that resides within this amplifier. Refined reproduction and overwhelming power defines the KAV-3250. Utilizing technology developed in the Krell Full Power Balanced amplifiers including oversized power supplies, Krell Current Mode circuitry, and balanced signal paths, this amplifier is ideal for use in multichannel music and movie soundtrack reproduction.
|
|
|
|
|
|
|
|
|
|
KAV-500
5 channel amplifier, 100 W at 8 ohms, 200 W at 4 ohms
|
|
|
|
KPE
The Reference KPE and the Standard KPE are high performance phono amplifiers designed to work with any moving coil cartridge. The Standard Krell Phono Preamplifier also supports moving magnet cartridges. Both versions offer a wide range of impedance selection for precise cartridge/phono preamplifier matching.
|
|
|
|
|
|
|
Krell KST
100 watt per channel power amplifier
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Reference
1000 Wpc into 8 Ohms, 2000 Wpc into 4 Ohms, 4000 Wpc into 2 Ohms, 8000 Wpc into 1 Ohm.
|
|
|
|
|
|
|
|
|
|
|
|
|
Showcase Amplifier
Simply elegant, the refined brushed aluminum Krellcoat finish only hints at the exhilarating performance that lurks beneath the exterior of the Krell Showcase Multichannel Amplifier. Every aspect, from sonic performance and power delivery to style and upgradability, functions in seamless harmony. Available in 5-, 6-, and 7-channel configurations, the Showcase amplifiers are solidly based on the same legendary Krell technologies found in any of its top-of-the-line-siblings.
|
|
|
|
Showcase Processor
The Showcase is Krell's fifth generation surround sound preamp/processor, delivering the benefits of almost a decade of experience in the development of reference-quality High End Audio Theater (HEAT™) systems. With the latest in surround sound technologies, a proprietary digital room equalizer, and an exceptional preamplifier section, the Showcase processor extends the KAV Series' tradition of Krell engineering and affordability to a new generation.
|
|
|
|
Theater Amplifier Standard
The Theater Amplifier Standard is a five-channel power amplifier boasting our latest circuit topology and a substantial power output of 200 Watts per channel into 8 Ohms (400 Watts per channel into 4 Ohms). The elegant Krellcoat exterior houses the technology developed in the Krell Full Power Balanced amplifiers including a gigantic power supply, Krell Current Mode circuitry, and balanced operation. The Theater Amplifier Standard is the reference multi-channel amplifier for systems that are used for stereo or multi-channel music and movie playback.
|
|
|