|
|
|
|
|
|
|
Audio HTB2 Subwoofer Speaker
With an ultra-reliable, high efficiency, 250W class D amplifier powering a 250mm (10in.) driver with a matching auxiliary bass radiator, the radical HTB2 model subwoofer anchors the 3D sound image with stunningly realistic low frequency reproduction. The HTB2 will play loud and clean all day long. Whether you prefer to position it vertically or horizontally, the story's the same: an acoustically inert enclosure shaped to eliminate internal standing waves, extremely fast response and SmartBass "connect and go" versatility with simple bass boost and phase controls.
|
|
|
|
Audio Kube-1 Subwoofer Speaker
Living proof that a subwoofer doesn't have to be ugly to thump, the KEF KUBE-1 powered subwoofer is lovely enough to grace a museum — one without noise restrictions.
|
|
|
|
Audio PSW 1000 Subwoofer Speaker
A 100 Watt on-board amplifier driving a 210mm (8") bass adds powerful extra dimension to the 3D sound image. A reflex design with carefully contoured ends to the 'racetrack' port to eliminate noise and sturdy internal bracing to minimise box coloration, the cabinet's distinctive soft edged styling is set off by a choice of Black Ash or Cherry finishes. The ideal entry level sub.
|
|
|
|
Audio PSW 2150 Subwoofer Speaker
A powerful, accurate subwoofer adds weight, depth and intensity to the 3D sound image, and the output of KEF's new slot port design has been increased by 10dB at 30Hz. The integral 250 Watt amplifier drives a forward-firing long-throw 250mm (10) bass unit with exceptionally low distortion characteristics for clean, well defined low frequency response throughout the room. This generously extended bass can be fine-tuned to suit your set-up and preferences, with a variable slope switch to ensure seamless integration with the satellite speakers, a ground lift switch to prevent hum and switchable cinema/music modes to provide extra punch for reproducing the full impact of movie special effects.
|
|
|
|
Audio PSW1150 Subwoofer Speaker
The PSW 1150 powered sub-woofer, with a 100 watt on-board amplifier and a 200 mm (8 inch) long-throw forward firing driver, embraces a new slot port design and has the addition of a ground lift switch, a 12dB/24dB slope option and a cinema/music facility. It also has variable frequency, phase and level adjustment, line level inputs and high pass outputs.
|
|
|
|
Audio PSW3500 Subwoofer Speaker
With a 300W power amp driving a 300mm (12”) down-firing long-throw bass unit, PSW3500 is capable of generating a heftily extended bass image over a very large area - and with level, phase, and frequency fully adjustable via infrared remote control, it’s easy to fine tune to your personal preferences and room acoustics. The components and circuitry in the distinctive elliptical cabinet are all of audiophile standard, and a separate infrared sensor allows the unit to be placed completely out of sight.
|
|
|
|
|
|
|
|
|
|
PSW 1000
A 100 Watt on-board amplifier driving a 210mm (8") bass adds powerful extra dimension to the 3D sound image. A reflex design with carefully contoured ends to the 'racetrack' port to eliminate noise and sturdy internal bracing to minimise box coloration, the cabinet's distinctive soft edged styling is set off by a choice of Black Ash or Cherry finishes. The ideal entry level sub.
|
|
|
|
PSW 2000
A discreet minimalist cube housing a high efficiency 250 Watt amp driving a 210mm (8") down-firing woofer, PSW 2000 packs the extended bass punch you need to feel the full impact of movie special effects. From the gold plated terminals to the bevel-edged glass top, the detailing is immaculate - and when you listen, that's exactly how it sounds.
|
|
|
|
PSW 2500
- Amplifier requirements 250 W built in
- Sensitivity (2.83V/1m) 100mV for full Output
- Maximum output 108 dB
- Magnetic shielding
|
|
|
|
PSW 3000
PSW 3000 is ideally suited to partnering the new Q Series, with a solid 300 Watts from the on-board amplifier, a 250mm (10") long-throw driver and audiophile grade internal components combined to deliver a bass presence of stunning depth and clarity to underpin the soundscape.
Fully adjustable via RF remote control functions, it looks as good as it sounds - and with this amount of power, that's mightily impressive.
|
|
|
|
PSW 4000
Serious stuff. No less than 500 Watts of high efficiency Class D amplifier power, with a 300mm (12") long-throw driver in a hand finished MDF cabinet. As you would expect, bass extension is more than generous - but what's really impressive is the way the LF response is immaculately controlled.
Output level, phase (infinitely variable) and the low pass filter frequency can be adjusted via radio remote control from anywhere in the home, so the unit can be concealed wherever you please.
|
|
|
|
PSW 5000
The ultimate powered subwoofer - as it would have to be in order to match the awesome performance standards set by the new Reference Series for which it was designed. How does a 1kW Class D amplifier with a 380mm (15") long-throw woofer sound? Simply devastating is the answer.
The subwoofer can be adjusted via radio remote control from anywhere in the home, so the unit can be concealed wherever you please. From the furniture quality real wood enclosure in Black Ash, Maple or Cherry to the tips of its gold plated terminal block, PSW 5000 includes performance without compromise.
|
|
|
|
PSW3500
- Down-firing long-throw bass unit
- Frequency fully adjustable
- Crossover frequency: variable/LFE
- Amplifiers: 300 W
|
|
|
|
Reference 208
- Design: Bass reflex, magnetically shielded
- Drive: Units 1 x 300mm (12in.) long-throw LF
- Maximum Output: 117dB
- Amplifier Requirements: 500W built in
- Magnetic Shielding
|
|
|
|
Reference 209
- Design: Closed Box, magnetically shielded
- Frequency Response (+/-3dB): 15Hz - 250Hz
- Maximum Output: 120dB
- Bass Extension: 12Hz (-6dB)
|
|
|
|
XQ60b
- Drive Units: 1 x 300mm (12in.)
- Frequency Range: 26Hz - 140Hz
- Amplifier: 200 Watts built-in Class-D
- Low level signal inputs: RCA phono sockets
- Power requirements: 100 - 240V ac ~ 50 / 60Hz
|
|
|
0 of 5
5 of 5
3.33 of 5
1 of 5
