|
|
|
|
|
|
|
1:2
The Kef Reference 1:2 Floorstanding Speaker is an improvement on the older Reference 1.
|
|
|
|
|
103.2
Kef 103.2 Reference speaker
|
|
|
|
|
|
|
|
|
|
|
105.2
3 way Loadspeaker with 12 inch Bass driver
|
|
|
|
|
|
|
|
|
|
|
|
|
Audio 203 Main / Stereo Speaker
Model 203 has all the ingredients that make the larger floorstanders great, but on a slightly smaller scale - the same new generation KEF technologies, the same carefully chosen high order components and the same unrivalled build quality.Acoustically inert, the curved section cabinets are heavily braced to eliminate box colourations, and finished in a choice of handmatched wood veneers. Magnetically shielded like the rest of the range, Model 203 combines intense musicality with real power - and the sonic imaging is never less than immaculate, right down to the tiniest detail.A purists loudspeaker.
|
|
|
|
Audio 205 Main / Stereo Speaker
For the smoothest possible response, much attention has been paid to evening out flux profiles. Both MF and HF coils in the UNI-Q driver array share a compound twin neodymium magnet assembly, and the two ultra-low distortion 200mm (8 ) bass drivers have balanced Faraday loops above and below the coil to ensure perfect symmetry of the magnetic field.
|
|
|
|
Audio 207 Main / Stereo Speaker
The spellbinding Reference Model 207 has the power to create heightened emotional states. Not by magic, but through technology.
|
|
|
|
Audio FiveTwo Model 11 Main / Stereo Speaker
Sound reproduction should be invisible - you want surround sound, with the hardware as unobtrusive as possible. That's why KEF came up with an alternative to the traditional five speaker home theatre systems. As its name implies, the new "fivetwo" series envelops you in the surround sound of a full 5.0 set-up using only two speakers - all you need to add to get the full 5.1 effect is a subwoofer.
|
|
|
|
Audio iQ1 Main / Stereo Speaker
This much sound should not come from something this size, especially not this much sound of this high quality. Its a testament to KEFs refined UNI-Q Array technology that these little wonders offer uncompromised volume and audio quality, debunking the bad name often given to bookshelf speakers.
|
|
|
|
Audio iQ3 Main / Stereo Speaker
The iQ3 is a slightly larger cabinet houses KEF's generation 160mm (6 1/2") Uni-Q array, complete with its acclaimed 19mm (3/4") aluminium dome neodymium tweeter. It's uncannily good at reproducing all the subtleties of the human voice, and creates a consistently accurate sound image over an exceptionally wide area. Musical, efficient and virtually distortion-free, it reveals more detail in your favourite tracks and brings screen action more vividly to life.
|
|
|
|
|
|
|
Audio iQ7 Main / Stereo Speaker
The spec of the iQ7 says it all: a new generation Uni-Q point source array with our latest aluminium dome tweeter at the centre of the matching titanium coated 160mm (6 1/2") cone, partnered by a dedicated long-throw bass driver of the same size. Response is accurate and distortion-free at all volumes, with fluidly articulate midrange, generous bass extension and faultless 3-D imagining. The tonal match is perfect with the rest of the range, and the shrouded terminals are designed for bi-wiring or bi-amplification. Spine-tingling home theatre has never been more affordable.
|
|
|
|
Audio iQ9 Main / Stereo Speaker
Hearing the iQ9 in action takes you to a different place - the illusion of presence is phenomenal. This awesome full size bass reflex floorstander partners the 160mm (6/2") Uni-Q mid/HF array with a brace of potent generation LF drivers featuring ultra-low distortion motors and natural fibre-loaded paper cones. Impeccable vocals, delicious midrange and incredible bass-extension - and with KEF's massive internal bracing, none of the LF distortions that usally affect tall speakers. For orchestral, big band or compositionally intricate works, we're talking devastating accuracy and emotional power. And when complemented by the iQ6c and either iQ3 or iQ7 rear channel speakers, iQ9 is a formidably competent full bandwidth front speaker for large room, high-end home theatre.
|
|
|
|
Audio KHT6000ACE Main / Stereo Speaker
Perfectly timbre-matched to the KEF KHT6000 satellites, the KHT6000C center channel speaker incorporates all of KEF's latest performance enhancing innovations to create a true audiophile-quality 3D sound picture: incredibly spacious, intricately detailed, and totally engrossing.
|
|
|
|
Audio Model 7 Main / Stereo Speaker
The compact model 7 (with seven drivers in each speaker) is ideal for the minimalist look. Voices sound real and precisely located. Ambient effects travel through a realistic three-dimensional soundscape as the director intended. On screen action comes alive for everyone in the room, wherever they sit.
|
|
|
|
Audio Model Three Main / Stereo Speaker
Model Three has five drive units and a 4-way crossover, with every component carefully matched and balanced to create a perfect illusion of presence wherever you sit in the room. Like all the Reference Series, it is fully magnetically shielded; as front speakers in the ultimate Home Theatre system, they deliver genuine cinema quality sound.
|
|
|
|
Audio XQ30 Main / Stereo Speaker
The pairing of an ultra-low distortion bass driver with the incarnation of KEF’s signature Uni-Q® ‘point source’ array for the middle and upper frequencies, disperses a compellingly rich three-dimensional sound field evenly throughout the listening area.
|
|
|
|
Audio XQ40 Main / Stereo Speaker
The Uni-Q arrays are hand selected for optimum pair matching, the LF drivers are independently loaded in order to raise the frequency of any internal standing waves above the working frequency band, where they can’t affect the integrity of the sound.
|
|
|
|
C5
- Crossover Frequencies: 2.5kHz
- Sensitivity (2.83V/1m): 90dB
- Maximum Output: 111dB
- Input Impedance: 8 Ohms
- Magnetic Shielding
|
|
|
|
|
|
|
C7
- Design: Two-way bass reflex
- Drive Units: 19mm (0.75in.) aluminium HF
- Crossover Frequencies: 2.5kHz
- Sensitivity (2.83V/1m): 91dB
- Amplifier Requirements: 15 - 200W
|
|
|
|
Coda 70
- LF Corner -6 dB 39Hz
- Crossover frequency 2.5 kHz
- Amplifier requirements 10 - 70 W
- Sensitivity (2.83V/1m) 91 dB
- Maximum output 109 dB
- Impedance 8 Ohms
|
|
|
|
|
Coda 9
6.5in woofer, 6.5in mid, 1in tweeter
|
|
|
|
Coda 90
- 3 way floorstanding HF: 25 mm (1”) Neo Alu dome + Ferrofluid tweeter
- LF: 130 mm (5”) coated pulp cone
- Copper cap and faraday ring
- SLF: 165 mm (6 1/2”) coated pulp cone Maple,
-
- Black Ash and Dark Apple 13.3 kg (29.2 lbs)
|
|
|
|
Cresta 30
- Frequency response: ±3 dB 45 Hz - 20 kHz
- Crossover frequency: 3 kHz
- Sensitivity: (2.83 V / 1m) 90 dB
- Impedance: 8 Ohm
|
|
|
|
|
|
|
HTS6001
- Design: 3-way closed box, ACE in MF enclosure
- Crossover Frequencies: 800Hz, 3kHz
- Sensitivity (2.83V/1m): 87dB
- Input Impedance: 8 Ohms
- Power Handling: 100W
|
|
|
|
HTS9001
- Design: 3-way closed box, ACE enclosure
- Crossover Frequencies: 400Hz, 3kHz
- Sensitivity (2.83V/1m): 88dB
- Maximum Output: 111dB
- Input Impedance: 8 Ohms
|
|
|
|
IQ5
- Design:Three-way bass reflex
- Maximum Output:109dB
- Nominal Impendance:8
- Magnetic Shielding
- Sensitivity: 88dB
|
|
|
|
IQ7
- Design: Three-way bass reflex
- Sensitivity: 90Db
- Maximum Output: 111dB
- Nominal Impendance: 8
- Magnetic Shielding
|
|
|
|
IQ9
- Design: Three-way bass reflex
- Maximum Output: 113dB
- Frequency Response: 38Hz - 40kHz
- Magnetic Shielding
- 19mm Aluminium dome HF
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Muon
- Crossover Frequencies: 120Hz, 300Hz, 2.3kHz
- Sensitivity (2.83V/1m): 90dB
- Frequency Response (+/-3dB): 25Hz to 60kHz
- Maximum Output: 118dB
- Amplifier Requirements: 100 to 400W (typical)
|
|
|
|
Q1
With KEF''s new generation 19mm (3/4") metal dome tweeter at its acoustic centre, the same UNI-Q® bass/midrange driver array as the floorstanding models reproduces the frequency spectrum with virtually no crossover effects. A powerful magnet system and refined crossover design improve power handling and response even further.
|
|
|
|
Q11
- HF unit for true point
- 130mm die-cast
- 19mm aluminium dome
- Magnetic shielding
|
|
|
|
|
|
|
Q3
With its Ferrofluid-cooled aluminium dome neodymium tweeter derived from the Reference series unit, the coincident source 165mm (6 1/2") UNI-Q driver array creates a spacious and intricate sound image thoughout the room, and bass extention from the large front-firing port is taut, gutsy and accurately controlled to preserve the clarity of the midrange. KEF''s unique bracing system increases cabinet rigidity to minimise distortion, and the sophisticated crossovers are connected directly to the bi-wire terminals for optimum signal integrity.
|
|
|
|
|
Q30
2 way 6.5in woof, 0.75in tweeter, Uni-Q design
|
|
|
|
|
|
|
Q35.2
2-way, 2-driver bass reflex coincident source speaker.
|
|
|
|
Q4
- Crossover frequency 250 Hz - 2.8kHz
- Amplifier requirements 15 - 150 W
- Sensitivity (2.83V/1m) 90 dB
- Maximum output 111 dB
- Impedance 8 Ohm
- Magnetic shielding
|
|
|
|
Q5
. The response of the midrange/HF array is fluid and accurate, and the 165mm (6 1/2") bass driver has its own tuned enclosure and reflex port for more dynamic power handling. Wherever you sit, the configuration adds depth and texture to the stereo image. The high order crossovers are computer optimised, and terminals are twinned for bi-wiring or bi-amplification.
|
|
|
|
|
Q50
Speakers Uni-Q design.
|
|
|
|
Q55
2&1/2 way design, 150W, 6ohm, 91dB/W/m, floorstanding
|
|
|
|
Q65
Reflex 6x9 in woofer, 6.5 in mid, 0.75 in tweeter
|
|
|
|
Q7
The 165mm (6 1/2") UNI-Q mid/HF driver array incorporates KEF''s sophisticated new 19mm (3/4") metal dome tweeter (Ferrofluid-cooled for improved power handling), so midrange is silken and vocals outstandingly pure. With the diaphragm area of a conventional 200mm (8") cone, KEF''s unique B169 ''racetrack'' format LF driver delivers terrific bass for such a slim cabinet. Computer-designed crossovers optimise sound quality, and KEF''s internal bracing eliminates the box resonances that often affect tall full size speakers.
|
|
|
|
Q70
Frequency response 45Hz-20kHz ± 3dB
Sensitivity 90dB, 2.83v at 1m
Amplifier requirements 10 - 175W
Impedance 6ohms
Net weight 16.9kg/37.2lbs.
Dimensions
(H x W x D) 1018 x 190 x 273mm
40 x 7.5 x 10.7in.
|
|
|
|
Q75
Q Series Flagship. 3 Way - 3 Driver + ABR Bass Reflex
|
|
|
|
|
|
|
|
|
|
RDM-2
2 way bookshelf 6.5 woofer, 1in tweeter
|
|
|
|
|
|
|
Reference 2
Two 6.5in woofers, 6.5 in mid, 1-in Uni-Q tweeter
|
|
|
|
Reference 201
All the latest Reference Series technology packed into a neat bookshelf package. The same sophisticated elliptical titanium dome Hypertweeter. The same carefully damped cast aluminium enclosure for the 5th generation UNI-Q driver array, with its thermoplastic rubber surround moulded onto the cone to avoid the slightest acoustic discontinuity. The same ultra-low distortion LF motor system for bass power with un-compromised accuracy.
|
|
|
|
Reference 203
Computer matched high order 4-way crossovers assure fluid transitions between the five drivers:
The Hypertweeter, the new UNI-Q coincident source midrange/HF and the two high-tech 165mm (6 1/2”) LF drivers. With KEF''''s ultra low distortion motor systems and stiff, lightweight reinforced diaphragms, they deliver deliciously open bass with incredibly low distortion even at high volume.
|
|
|
|
Reference 205
Both long-throw 200mm (8”) bass drivers operate in parallel at low frequencies where throw is critical, but the lower unit is rolled off early to allow the top LF driver to dominate at the crossover to the lower midrange unit for the smoothest possible integration.
|
|
|
|
Reference 207
A true five-way design, the 207 is instantly recognisable by the cast aluminium pod, which is shaped to minimize diffraction and to damp the internal sound field of the upper midrange section of KEF’s new generation UNI-Q driver array.
|
|
|
|
|
|
|
|
|
|
XQ1
Irresistible - the compact three-way stand mount speaker that's packed with Reference Series technology.
With a performance envelope extending way beyond what's audible, XQ one has everything it takes for immersing yourself in the world of modern digital sound: a 19mm (3/4") titanium Hypertweeter that puts conventional supertweeters to shame, its output perfectly aligned with the 165mm (6.5") Uni-Q array containing one of the most natural-sounding tweeters anywhere.
|
|
|
|
XQ3
All the sophistication of XQ five in a chic stand-mount format: the same 'super audio' high frequency extension, thanks to KEF's Hypertweeter. The same outstanding elliptical dome 19mm tweeter / 165mm (6.5") midrange Uni-Q array. A low-distortion 165mm (6.5") bass driver in its own separate enclosure. The same separate high order crossovers for different sections of the frequency spectrum.
The look may be disarmingly simple, but there's no mistaking the richness and complexity of the sound image XQ three can create.
|
|
|
|
XQ5
Tall, slim and assertive, XQ five is a genuine four-way floorstander with two 165mm (6.5") bass drivers in addition to the 165mm (6.5") midrange/HF Uni-Q array and KEF's new titanium dome Hypertweeter.
Nothing is allowed to compromise accuracy of output. The ultra-low distortion LF drivers are independently loaded in order to raise the frequency of any internal standing waves above the working frequency band, where they can't affect the integrity of the sound. And to minimise any electrical coupling, the LF/MF crossover is physically separate from the HF/SHF sections
|
|
|
0 of 5
4.7 of 5
3.85 of 5
3 of 5
