|
|
|
|
|
|
|
Audience 42 SAT
- Sensitivity (2,83 V/1 m): 86 dB
- IEC Power Handling: 150 W
- Impedance: 4 Ohms
- Box Principle: 2-way, bass-reflex
|
|
|
|
Confidence C1
Dynaudio introduces the new Confidence C1, the first compact loudspeaker in the innovative, high-performance Confidence series. The technology is based on the development of the Confidence C2 and C4 models, integrated into a two-way design with a clear-cut but individually contoured shape.
The C1 was developed to be used both as a two-channel stereo speaker as well as a main, side or rear channel speaker in a surround set-up in the Confidence performance level. The C1 base plinth is designed with integrated mounting holes to accommodate the new Dynaudio Stand², a solid and aesthetically suitable base for the loudspeaker. The C1 may also be placed on bookshelves or into A/V cabinetry if necessary.
|
|
|
|
Contour 1.1
2 way bookshelf, bass reflex w/ 6in woofer, 1in tweeter
|
|
|
|
Contour 1.3 MKII
The Contour 1.3 MKII is a compact, two-way book-shelf speaker with enhanced bass drivers for extra stamina and power.
|
|
|
|
Contour 1.3 SE
The Contour 1.3 SE utilizes specifically engineered and produced drivers. The front plates of the drivers and the rear mounted terminal plate are coated with special titanium-metallic lacquer paint. The woofer is a newly constructed design, utilizing a specially developed, high-impulse voice coil and powerful hybrid (neodymium/ferrite) magnet system. The goal was to achieve incredibly fast and precise bass reproduction, with intense transient behavior. The design creates a well-controlled linear movement of the voice coil, and provides outstanding dynamics and low bass extension, while also reducing distortion. The special tweeter design is incorporating a new, intensely powerful magnet system and advanced chamber tuning.
|
|
|
|
Contour SR
- Sensitivity (2,83 V/1 m): 85 dB
- IEC Power Handling: 100 W
- Impedance: 4 Ohms
- Frequency Response (± 3 dB): 85 Hz – 25 kHz
- Crossover Frequency: 2300 Hz
|
|
|
|
DM 2/10
- Sensitivity (2,83 V/1 m): 89 dB
- Impedance: 150 W
- Frequency Response (± 3 dB): 40 Hz – 20 kHz
- Box Principle: 2-way, bass-reflex
- Crossover Frequencies: 2200 Hz
|
|
|
|
DM 2/7
- Sensitivity (2,83 V/1 m): 86 dB
- Impedance: 150 W
- Frequency Response (± 3 dB): 50 Hz – 23 kHz
- Box Principle: 2-way, bass-reflex
- Crossover Frequencies: 2600 Hz
|
|
|
|
DM 2/8
- Sensitivity (2,83 V/1 m): 88 dB
- Impedance: 150 W
- Frequency Response (± 3 dB): 50 Hz – 20 kHz
- Box Principle: 2-way, bass-reflex
- Crossover Frequencies: 2300 Hz
|
|
|
|
Excite X12
Even the smallest nuances are reproduced precisely and authentically. The silky-smooth yet extremely detailed high frequency performance is due to the further improved Dynaudio specially coated soft dome tweeter, a legend in its own right. It is mounted as close as possible to the mid/bass driver in order to achieve the most precise soundstage, acting as an ideal one-point source of sound - where music simply sounds right. This is also achieved through the finely tuned crossover which, as in every Excite model, features ceramic resistors, air-copper-coils and high quality internal cabling. The impedance is constant and linear over the entire frequency range, thus providing an easy load to any amplifier.
The strict use of highly rigid die-cast aluminium driver baskets in all Excite models further enables a clear, pure, undistorted reproduction of music to be achieved.
· 27 mm soft dome tweeter with precision coating
· 14.5 cm Long-throw mid/bass driver with MSP membrane
· Extremely lightweight aluminium wire voice coils
· Highly rigid die-cast aluminium driver baskets
· Phase aligned 2-way crossover
· Low-resonance MDF cabinet with 25 mm baffle
· Rear bass-reflex port, sealable
· Detachable cloth grille
· Dynaudio Stand1 (black or silver) optional
|
|
|
|
Excite X16
- Sensitivity: 87 dB (2.83 V/1 m)
- IEC Power handling: 150 W
- Impedance: 4 Ohms
- Frequency Response: 40 Hz-23 kHz
- Box Principle: 2-way bass-reflex
- Crossover Frequency: 1800 Hz
|
|
|
|
|
|