|
|
|
|
|
|
|
|
|
|
OBH-14
24 Bit D/A Pre-amplifier
|
|
|
|
OBH-15
- Signal-to-Noise Ratio: MM -83 dB, MC -75 dB
- Output: MM and MC 250 mV
- Dimensions: 6" deep, 4" wide, 2.5" tall
|
|
|
|
OBH-18
- Signal to Noise Ratio: - 83 dB
- Total Harmonic Distortion: < 0.03%
- R1AA deviation: ± 0.5%
- Output: 250 mV
- Output Impedance: 100 Ohm
- Overload margin: 25 dB
|
|
|
|
OBH-22
The function of the Creek OBH-22 passive preamplifier is to provide input selection and volume adjustment to a Hi-Fi system from an armchair, via infra-red remote control. The unit can also be controlled directly from the front panel.
The OBH-22 consists of a high quality motorised volume potentiometer, and two stereo relays which select the desired input plus tape output, together with a muting relay that can short the signals to ground.
A built-in micro-controller decodes the infra-red signals transmitted by the handset and translates them into commands which activate the motorised potentiometer and the muting and input selection relays.
After each operation, the micro-controller turns itself off to avoid any possibility of interfering with the main music signal. LED's are used to indicate the status and mode of operation.
The OBH-22 is purely passive and does not introduce any gain or distortion into the signal path. It is therefore suitable to be used as a control pre-amplifier, provided the sensitivity of the power amplifier that is being used is high enough to be driven directly from the source. i.e. CD player or tuner etc.
The volume control can be operated manually at any time, whether the OBH-22 is powered or not, but without power only Line 1 can be utilised.
Specifications:
Input Impedance <20k Ohm
Output Impedance 20k Ohm
Separation > 80 dB's @ 1kHz
Attenuation 0 - 90 dB's
Inputs 3 Stereo pairs, inc Tape
Outputs 2 Stereo pairs, 1 fixed, 1 variable
Relay Muting Factor > 90dB's
Weight 6.1Kg
Size 15 x 10 x 66cm
|
|
|
|
OBH-8SE
MM & MC Phono Pre-Amplifier
|
|
|
|
OBH-9
MM & MC Phono Pre-Amplifier
|
|
|
|
OBH-9SE
MM & MC Phono Pre-Amplifier
|
|
|
|
|
|
|
P43
The Creek P43 is a high quality Pre-amplifier designed and manufactured in the UK. This product has been designed with the assistance of CAD (Computer Aided Design) to meet the growing demand for high sound quality and increased facilities. The P43 is extremely versatile and, although designed to primarily work with the matching Creek A43 Power amplifier, it can be partnered with as many as 3 regular (unbalanced) domestic power amplifiers or one balanced and one regular. The P43 is constructed in a similar case to the Creek 4330 Integrated Amplifier, the control layout is also similar, but that is where the similarity ends.
|
|
|
|
|
|