|
|
|
|
|
|
|
14B SST
- Available in both 240 Volt 10 Amp
- Over 100,000 MFD of filter capacitance per channel
- Selectable gain Normal Balanced
- Remote 12-Volt power trigger input
- Selectable external power-up
- Membrane power switch
|
|
|
|
14B SST 2-Channel Amplifier
To design a State of the Art, ultra high powered Dual Mono Amplifier. The Bryston 14B SST is a balanced-output amplifier which reduces THD and IMD to unprecedented low values, (typically 0.001% or less), for a new degree of transparency, musicality and ease of listening. Superbly low noise floor, typically below – 118dB, yields an inky black silence between notes for hauntingly realistic reproduction. Tremendous power reserves give the 14B SST virtually perfect freedom from overload on any type of speaker or music, bringing the performance and realism directly into your listening environment. The ability to resolve subtle details has to be heard to be believed – it truly sets a new standard – mission accomplished.
|
|
|
|
14B SST2
- 600 watts at 8 ohms, 900 watts at 4 ohms
- Selectable Balanced or Unbalanced inputs
- Lower noise and distortion
- New computer modeled heat-sink design
- Selectable gain - 1 Volt or 2 Volt
|
|
|
|
14B ST
The 14B ST is a powerhouse (85 lb.) single chassis amplifier providing a minimum of 500 watts per channel at 8 ohms and 800 watts at 4 ohms.
|
|
|
|
270
- Right-channel only of the stereo version
- Distortion is below .01 % from 20Hz to 20kHz
- Direct output from the amplifier
- 8-ohm speaker
|
|
|
|
28B SST 2
- Selectable gain - 1v = 29db or 2v = 23dB
- External power on off control - 12v trigger
- New power switch
- All A/C is totally shielded from Audio circuits
|
|
|
|
2B-LP
50 watts per channel
|
|
|
|
2B-SST
- 100 watts per channel 8 ohms
- 180 watts 4 ohms
- 350 watts bridged 8 ohms
- New SST output devices
- Selectable Balanced
- Lower noise and distortion
|
|
|
|
2BSST 3-Channel Amplifier
The 2BSST is a duel mono design power amplifier consisting of two totally independent amplifiers with +/-58V power supply modules. The Bryston 2BSST will operate as a STEREO power amplifier or as a bridged MONO power amplifier. Each 2BSST channel provides input switching and connections for balanced (XLR type) or single ended (RCA style) input. Each 2BSST channel provides sensitivity selection for 1 Volt (29dB gain) or 2 Volt input sensitivity (23dB gain). The 2BSST has remote A/C power control using a low volt trigger input.
|
|
|
|
370
- Right-channel only of the stereo version
- Distortion is below .01 % from 20Hz to 20kHz
- Direct output from the amplifier
- 8-ohm speaker
|
|
|
|
3B SST
- Membrane Power Switch
- Soft start circuit on power up
- Multiple filter capacitance per channel
- Selectable inputs for balanced
- Remote 12 Volt power trigger input
- Selectable gain settings
|
|
|
|
3B SST 2-Channel Amplifier
The 3B SST stereo amplifier, at 150 watts per channel into 8 ohms and 250 at 4 ohms, provides all the quality and value of the larger amplifiers but in a package which is both compact and powerful. Suitable for a wide range of audio/video systems where sonic accuracy, medium power and long term reliability is required.
|
|
|
|
|
|
|
470
- Right-channel only of the stereo version
- Distortion is below .01 % from 20Hz to 20kHz
- Direct output from the amplifier
- 8-ohm speaker
|
|
|
|
4B SST
- Membrane Power Switch
- Soft start circuit on power up
- Multiple filter capacitance per channel
- Selectable inputs for balanced
- Selectable gain settings
|
|
|
|
4B SST 2-Channel Amplifier
The Bryston 4B SST is something of a legend among audio amplifiers. As our most popular it has attained international status as an amplifier suitable for the finest and most sophisticated sound systems. Whatever the venue, be it a recording studio stage, a broadcast facility, a home theater installation, or a state-of-the-art stereo system, Bryston has continued to be the number one choice. The 4B SST is a pure dual mono design and offers 300 watts per channel into 8 ohms and 500 watts into 4 with over 1000 watts available in bridged mode.
|
|
|
|
|
|
|
6B SST
- Membrane Power Switch
- Soft start circuit on power up
- Multiple filter capacitance per channel
- Selectable inputs for balanced
- Selectable gain settings
- Optional 17" Faceplate
|
|
|
|
6B SST 3-Channel Amplifier
The Bryston 6B SST is a single chassis power amplifier consisting of three totally independent amplifier modules, each with its own power transformer and power supply. Each audio channel provides connections for balanced or single ended input and will supply effortless power to the world''s most demanding loudspeakers. The 6B SST is a new modular design from Bryston packaged in a convenient single chassis. Each modular channel contains all the electronic circuitry, connections and independent power supply. The chassis simply provides Soft-Start AC to each channel, and a separate power LED illuminates on the front panel indicating individual channel power status. The Byston 6B SST provides 3 X 300 watts per channel at 8 ohms or 3 X 500 watts per channel at 4 ohms. Three completely separate and independent power supplies are employed to prevent any possibility of channel to channel cross-talk or interference.
|
|
|
|
7B SST
- Membrane Power Switch
- Soft start circuit on power up
- Multiple filter capacitance per channel
- Selectable inputs for balanced
- Selectable gain settings
|
|
|
|
7B SST Amplifier
The 7B SST is a MONO block design capable of over 600 watts at 8 ohms and over 900 watts at 4 ohms. This gives the 7B ST the power to drive, with breath-taking ease and clarity, speakers, which have been considered "impossible" loads in the past. One advantage of the Mono design 7B SST is it allows you to place the amplifier adjacent to the loudspeaker providing improved performance. The 7B SST is available in either a Series or Parallel version. ''Series'' is recommended with loudspeaker loads above 3 ohms and ''Parallel'' for loudspeaker loads below 3 ohms.
|
|
|
|
|
|
|
875 HT
- 7.1 surround system incorporating 7 channels
- 6.1 surround system incorporating 6 channels
- 5.1 surround system incorporating 3 channels
- 7.1 surround system incorporating 250 watts
|
|
|
|
875 Z
- Right-channel only of the stereo version
- Distortion is below .01 % from 20Hz to 20kHz
- Direct output from the amplifier
- 8-ohm speaker
|
|
|
|
|
|
|
9B SST
- Membrane Power Switch
- Soft start circuit on power up
- Multiple filter capacitance per channel
- Selectable inputs for balanced
- Selectable gain settings
|
|
|
|
9B SST2
- New Push on/off power switch
- Selectable Balanced or Unbalanced inputs
- Lower noise and distortion
- New computer modeled heat-sink design
- Selectable gain - 1 Volt or 2 Volt
|
|
|
|
|
|
|
BP16 Amplifier
The BP-16 is a state of the art analog stereo preamplifier which utilizes ‘software’ control. The software allows us to provide many more features and functions while still adhering to traditional fully discrete analog circuits throughout the preamplifier.
|
|
|
|
BP26 Amplifier
Designed inside and out to reflect the improvements in the entire Bryston line, these preamplifiers are a perfect match to the SST series of amplifiers. All aspects of the signal flow are greatly improved, with lower noise and distortion figures, and higher overload levels.
|
|
|
|
PowerPac 300 SST
- Allows direct attachment
- On-wall mounting
- Easy application
- Balanced or unbalanced operation
- Gold plated 5-way banana jacks
- Level control adjustment
|
|
|
|
POWERPAC 60 1-Channel Amplifier
The Bryston PowerPac 60 amplifier, is a no-compromise, modular, single channel power amplifier delivering 60 watts at 8 Ohms, or 100 watts into 4 Ohms. The PowerPac 60 is a modular monaural version of our very popular 2B-LP stereo amplifier but designed to be utilized in applications where portability, sound quality and flexibility are of prime importance.
|
|
|
|
SP-2 7.1-Channel Amplifier
The Bryston SP 2 is the processor designed to make home theater easy for the non-technical user. For example, most functions are automatic, controls are well-labeled, and there are clear unambiguous LCD and LED displays. Step-by-step set-up menus with error messages displayed on the LCD window, and a user-friendly, yet comprehensive user manual, make the initial set-up simple and straightforward.
|
|
|
5 of 5
0 of 5
4 of 5
