|
|
|
|
|
|
|
AS1
- Power Output: 85W continuous
- Rated Power Consumption: 120W
- Input Impedance: 100k ohms
- Signal Noise: 94dB
- Functions: Volume level - Bass roll-off alignment
- Inputs: Line In (RCA Phono)
- Speaker level In (spring clips)
|
|
|
|
AS2
- Active closed-box subwoofer system
- Low-pass filter frequency
- Low-pass filter bypass
- Bass roll-off alignment
- Auto sense on/standby
|
|
|
|
|
|
|
ASW 10CM
- 500W class 'D' power amplifier
- Switch mode power supply
- Active closed-box subwoofer system
- Power output: 500W
- Input impedance: 33kW
|
|
|
|
ASW 2500
Active closed-box subwoofer system
|
|
|
|
ASW 300
- Active vented-box subwoofer system
- Dimensions Height: 405mm (16 in) including fixed feet
- Width: 330mm (13 in)
- Depth: 375mm (14.8 in) including grille and controls
- Allow extra 50mm (2 in) clearance at rear for ventilation
- Net Weight 15kg (33 lb)
- Freq. Response -3dB 27Hz - 150Hz adjustable (EQ at A)
- Freq. Range -6dB at 27Hz and 180Hz adjustable (EQ at A)
|
|
|
|
ASW 600
The 250mm (10 in) driver employs an extremely rigid cone to withstand the considerable forces generated by dynamic bass signals and the integral 150W amplifier, features our Bass Overload Suppression System circuitry to avoid the annoying distortion effects that might normally occur should some unexpectedly loud signal threaten to overload the subwoofer.
The ASW600 can accept both line level and speaker level inputs and has a choice of equalisation, enabling the response to be tailored to your room.
|
|
|
|
ASW 650
The ASW650 has all the attributes of the ASW600, but is more suited to larger rooms because of its greater output capability, achieved by a combination of a larger cabinet, driver and amplifier.
In this case the driver is a 300mm (12 in) unit that can go lower in the bass that its smaller sibling. Its capabilities are fully exploited by the powerful 200W on-board amplifier.
|
|
|
|
ASW 675
Sealed cabinet, 10" composite aluminium/paper/Kevlar long-throw driver, 500W Class D amp with switch mode power supply, 22Hz-31/110Hz -3dB adjustable, 13.4"x13.4"x16.2", 56lb.
|
|
|
|
ASW 700
Active closed-box subwoofer system, 10" paper/Kevlar cone long-throw driver, 500W amplifier, ±3dB 22Hz–31/110Hz adjustable, 58lb.
|
|
|
|
ASW 750
Active closed-box subwoofer system, 12" paper/Kevlar cone long-throw driver, 1000W amplifier, ±3dB 20Hz–31/110Hz adjustable, 70lb.
|
|
|
|
ASW CDM
- Active closed-box subwoofer system
- Dimensions Height: 392mm (15.4 in) not including removable spike feet
- Width: 396mm (15.6 in)
- Depth: 490mm (19.3 in) including grille and controls
- Allow extra 50mm (2 in) clearance at rear for ventilation
- Net Weight 32.5kg / 72 lb
- Freq. Response -3dB 20Hz - 31/110Hz adjustable (EQ at A)
- Freq. Range -6dB at 15Hz and 40/140Hz adjustable (EQ at A)
|
|
|
|
ASW CM
- Power Output: 500W
- Rated Power Consumption: 75W
- Input Impedance: 22k ohms
- Signal Noise: >90dB
- Functions: Volume level - Low-pass filter frequency - Low-pass filter bypass - Bass roll-off alignment - Auto sense on/standby - Phase 0/180
|
|
|
|
ASW608
- Active closed-box subwoofer system
- Frequency range: -6dB at 23Hz and 25/140Hz adjustable
- Frequency response: ±3dB 32Hz – 40/140Hz adjustable
- Power output: 200W
- Rated power consumption: 40W/ 0.5W standby
|
|
|
|
ASW610
- Active closed-box subwoofer system
- Frequency response: ±3dB 27Hz – 40/140Hz adjustable
- Power output: 200W
- Rated power consumption: 40W / 0.5W standby
|
|
|
|
ASW610XP
- Active closed-box subwoofer system
- Frequency response: ±3dB 25Hz – 40/140Hz adjustable
- Power output: 500W
- Rated power consumption: 98W / 1W standby
|
|
|
|
ASW825
- Class-D with switch mode power supply
- Power Output: 1000W
- Rated Power Consumption: 150W
- Input Impedance: 33 kohms
- Low-pass filter bypass
- Bass roll-off alignment
|
|
|
|
ASW855
- 1000W Class-D amplifier
- Active closed-box subwoofer system
- Power output: 1000W continuous
- Rated power consumption: 150W
- Input impedance: 33kW
|
|
|
|
ASW865
- Class-D with switch mode power supply
- Power Output: 100W
- Rated Power Consumption: 150W
- Input Impedance: 33 kohms
|
|
|
|
ASW875
- Class-D with switch mode power supply
- Power Output: 1000W
- Rated power consumption: 150W
- Input Impedance: 33 kohms
|
|
|
|
PV1
2 x 8" mica/aluminium cone long-throw woofer, 500W Class D amplifier, 21Hz–31/110Hz adjustable ±3dB, 45lb.
|
|
|