REVIEW SHOP SHARE LEARN
 A-100 Monophonic Power Amplifier
The A-100 is the result of an uncompromising quest for musical excellence, this pure Class-A monophonic power amplifier uses a MOSFET output stage and an all-stage push-pull bridged configuration. The balanced signal transmission principle is maintained throughout, resulting in clean and powerful speaker drive capability.
 
 A-20 Stereo Power Amplifier
The A-20 is a stereo power amplifier operating in pure class A. It incorporates a wealth of sophisticated Accuphase high-end technology. Each circuit device used in the A-20 has been strictly selected to provide top-grade performance. Its conservative power rating combined with unsurpassed musical realism make the A-20 ideal for use as a stand-alone amplifier in a small quality-oriented system or as a midrange/high-range amplifier in a multi-amplification setup.
 
 A-20V
20W x 2 into 8 ohms 40W x 2 into 4 ohms 80W x 2 into 2 ohms
 
 A-30
  • Pure Class A operation
  • Power MOS-FET output stage
  • Instrumentation amplifier principle
  • Further improved MCS circuit topology
  • Bridged mode
 
 A-35
  • Power MOS-FET output stage
  • Instrumentation amplifier principle
  • Further improved MCS+ circuit topology
  • Current feedback combines operation stability
  • Strong power supply with large power transformer
 
 A-45
  • Power MOS-FET output stage
  • Instrumentation amplifier principle
  • Further improved MCS+ circuit topology
  • Bridged mode allows upgrading to true monophonic amplifier
  • Large high-efficiency toroidal transformer rated for 600 VA
 
 A-60
  • Pure Class A operation
  • Power MOS-FET output stage
  • Input circuitry with MCS topology
  • Bridged mode
 
 A-65
  • 10-parallel push-pull configuration
  • Input section configured as instrumentation amplifier
  • Further improved MCS+ circuit in amplifier section
  • Current feedback topology combines stable operation
  • Two selectable meter types
 
 C-265 Stereo Amplifier
The C-265 is a stereo control center designed for impeccable sound quality. It incorporates a wealth of prestigious Accuphase technology, such as balanced signal transmission and current feedback line amplifier stages. In its standard configuration, the C-265 offers a versatile array of line-level inputs, but by installing the optional analog disc board in a dedicated slot on the rear panel, which offers outstanding analog disc reproduction.
 
 E-408
  • Triple parallel push-pull output stage delivers high power: 180 watts per channel into 8 ohms
  • Preamplifier and power amplifier with MCS topology and current feedback
  • Logic-control relays permit straight and short signal paths
  • Tone control circuits
  • Ample power supply with high-capacity R-toroidal transformer
 
 M-100
  • Continuous average output power: 800 watts
  • Total harmonic distortion: 0.01%
  • Voltage Amplification in decibels: 27.8dB
  • Frequency response: 20-20,000 Hz
 
 M-1000
  • Continuous average output power: 1800 watts
  • Total harmonic distortion: 0.05%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20-20,000 Hz
 
 M-2000
250-W Mono Amplifier
 M-60
  • Power output: 450 watts
  • Total harmonic distortion: 4ohms
  • Intermodulation distortion: 0.01%
  • Frequency response: 2Hz to 150,000Hz
 
 M-6000
  • Two totally identical power amplifier circuits driven in parallel
  • Input stage configured as double instrumentation amplifier
  • Double MCS+ circuit and current feedback topology in amplification stage
  • Power supply with massive high-efficiency 900-VA toroidal transformer
 
 M-8000 Monophonic Power Amplifier
  • Ultra-powerful output stage with 22 parallel push-pull transistors remains linear down to extremely low 1-ohm load impedance
  • MCS configuration in input stage
  • Stabilized power supply in driver stage
  • Current feedback circuit topology assures great sound and stable operation
  • Bridged use of two units possible for four times the output power
  • Massive Super Ring toroidal transformer rated for 3 kVA max
 
 P-1000
  • Powerful 11-parallel push-pull output stage
  • Current feedback circuit topology
  • Bridged connection mode
  • Massive Super Ring
  • Printed circuit boards
  • Balanced inputs
 
 P-102
  • Damping factor: 70
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000Hz
 
 P-11
  • Damping factor: 200
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000Hz
 
 P-20
  • Power Output: 100watts
  • Total harmonic distortion: 0.1%
  • Intermodulation distortion: 0.1%
  • Frequency response: 20Hz to 20,000Hz
 
 P-250
  • Power Output: 140watts
  • Total harmonic distortion: 0.1%
  • Intermodulation distortion: 0.1%
  • Frequency response: 20Hz to 20,000Hz
 
 P-260
  • Normal operation: 180 watts
  • Class-A operation: 45 watts
  • Intermodulation distortion: 0.1%
  • Frequency response: 20Hz to 20,000Hz
 
 P-266
  • Normal operation: 180 watts
  • Output load impedance: 4 ohms
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000Hz
 
 P-300
  • Power Output: 200 watts
  • Total harmonic distortion: 4ohms
  • Intermodulation distortion: 0.01%
  • Frequency response: 1Hz to 250,000 Hz
 
 P-3000
  • Triple parallel push-pull output
  • Instrumentation amplifier derived
  • Advanced MCS circuit topology
  • Bridged connection mode
  • Massive Super Ring toroidal
 
 P-350
  • Power Output: 200 watts
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.02%
  • Frequency response: 20Hz to 20,000 Hz
 
 P-360
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000 Hz
 
 P-370 Stereo Power Amplifier
  • 3-parallel push-pull output stage delivers linear power into ultra-low impedance loads
  • Current feedback circuit topology combines excellent sound quality with total operation stability
  • Bridged connection mode allows upgrading to true monophonic amplifier
  • Massive Super Ring toroidal transformer
  • Balanced inputs
  • Two sets of large speaker connnectors
 
 P-400
  • Normal Operation: 300watts
  • Total harmonic distortion: 0.01%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000 Hz
 
 P-4100
  • Output stage with 3-parallel push-pull configuration
  • Instrumentation amplifier principle used for signal paths
  • Further refined MCS+ circuit topology
  • Massive toroidal transformer rated for 950 VA
  • 4-step gain control
 
 P-450
  • 4-parallel push-pull output stage
  • Current feedback topology
  • Bridge mode creates a true monophonic amplifier
  • Large power supply
  • Balanced inputs
 
 P-500
  • Damping Factor: 500
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.003%
  • Frequency response: 20Hz to 20,000 Hz
 
 P-5000
  • Powerful 6-parallel push-pull output stage in each channel delivers linear power down to very low load impedances
  • Input stage with MCS topology
  • Current feedback circuit combines excellent sound quality with total operation stability
  • Bridged connection mode allows upgrading to true monophonic amplifier
  • Massive Super Ring toroidal transformer rated for 1 kVA
  • 4-step gain control
 
 P-600
  • Damping Factor: 300
  • Total harmonic distortion: 0.02%
  • Intermodulation distortion: 0.01%
  • Frequency response: 20Hz to 20,000 Hz
 
 P-650
100W x 2 into 8 ohms 200W x 2 into 4 ohms
 
 P-7000
  • Powerful 11-parallel push-pull output stage in each channel delivers linear power into loads as low as one ohm
  • Input stage with MCS topology
  • Current feedback circuit combines excellent sound quality with total operation stability
  • Bridged connection mode allows upgrading to true monophonic amplifier
  • Massive Super Ring toroidal transformer rated for 1.5 kVA
 
 P-7100
  • Instrumentation amplifier type design of amplification stages
  • Further refined MCS+ circuit topology
  • Current feedback circuit combines excellent sound quality
  • 4-step gain control
  • Massive Super Ring toroidal transformer rated for 1.5 kVA
 
 
 PX-600 Power Amplifier
  • Power amplifier with six identical channels
  • Parallel push-pull output stages rated for 100W x3(8ohms) or 150W x6(4ohms)
  • Bridged operation yields 300W x3(8ohms)
  • Current feedback principle combines excellent sound quality with stable operation
  • 700VA Super Ring toroidal transformer
 
 PX-650
  • Totally separate six-channel configuration
  • Output power 200 watts × 6 into 4 ohms
  • Large 820 VA toroidal transformer
  • Balanced inputs
  • Three large analog power meters
 

Popular Amplifiers

more...

Latest and Greatest

Best Floorstanding Speakers Under $1000

So many to choose from! Lets us boil it down. How to Choose a Floorstanding Speaker that fits you:

Marantz MA-9S2 Reference Series Power Amplifiers Review

Marantz MA-9S2 Power AmplifierThe list above has one tenet that I continue to hold true: high powered amplifiers are necessary to reproduce the full dynamic range of music with most speakers. This became apparent when I changed from the 100 Watt per channel Bella Extreme 100 to the 250 Watt.....

Lowther’s DX-65 driver in the Teresonic Magus XR Review

A new driver from Lowther is real news. A new five inch driver is even rarer news, so it was with great anticipation that I waited on this pair of speakers to arrive.

Aune Mini Headphone DAC User Review

The unit arrived from China well packed and everything seem to be in place. No external abuse by the carriers. The only problem was the power supply it came with. The box came with a cheap step-down converter.

Aural Symphonics Chrono b2 balanced interconnects Review

The Aural Symphonics Chrono b2 is more a study in contrasts than most cables. Chrono b2 refers to balanced version 2.

Three Koetsu cartridges

The Koetsu line consists of 18 different cartridges divided into four sub categories. The aluminum body Black Goldline at $1800, the Rosewood series starting at $2600 and up to $5900, the Urushi line starting at $4300 to $4900, the Stone Body Platinum series starting at $8000...

Cambridge Azur 840E and 840W Review

If this combo would surmount the challenges and rise to the same level of performance, Cambridge would have a trinity of tasty components worthy of consideration by anyone...

Audio Tekne TFM-9412 integrated 300B amplifier Review

A Dagogo featured article: In the negotiation of his wish to become the U.S. Importer of Audio Tekne, Yujean was given a set of “rules” by Mr. Kiyaoki Imai, owner of Audio Tekne.....

News & Reviews

Submit Content Here
more...
Come join the community. What do you have to say?
CDs are dying media. Linn says CDs are over.
The CD player is dead. So says Linn Products, th#8220;streaming players” - that allow them to encode their entire CD collection in order [...]   more...

Editor’s Choice Best Buy Budget Audiophile Holiday Guide
Budget doesn’t mean cheap or bad. Therst thing on the shelf.  For a bit more money you can have something worth its weight in cash.  [...]   more...

Used Gear Wednesday - Don’t Pass It Up!
Did you know that audioREVIEW has a classifieds sut it and we want to highlight good deals and gear from it. Every Wednesday we’ll select [...]   more...

Audio-Technica Noise-Cancelling Headphones
Noise-cancelling headphones are becoming the heay season, Audio-Technica® offers the perfect holiday gift for music lovers – the new ATH-ANC7b [...]   more...

Moscode 402Au OLT stereo power amplifier Review
Featured Article from Doug Schroeder describesh…,” while trying to cover my profound ignorance. Harvey “Gizmo” Rosenberg, the colorful owner [...]   more...