|
|
|
Plinius 9200
200W x 2 into 8 ohms, phono input, preamp out, tape loop, processor loop.
|
|
|
|
Musical Fidelity kW 500
- Vacuum tubes in the preamp stage
- Unique 6112 mu-vista tube
- A mil-spec built for ultra-high reliability and long life
- Iron-fisted control
- Separate chassis matching
|
|
|
|
|
|
|
PrimaLuna DiaLogue Two
Tube integrated amplifier.
Adaptive AutoBias circuit improves performance, lowers distortion, and
eliminates the need to adjust tube bias.
Triode/Ultralinear switching.
True Home Theater Bypass.
Full-function Remote Control.
SoftStart circuit extends component an
|
|
|
|
Krell KAV-500i
Integrated Amplifier - 250 W at 8 ohms, 500 W at 4 ohms
|
|
|
|
Accuphase E-407
- Current feedback principle combines superb sound with total operation stability. - Logic-controlled relays for shortest signal paths. - Separator switch allows independent use of pre/power sections. - Large toroidal power transformer.
|
|
Sumiko Primare I20
- Dual-mono design
- Excellent dynamics
- Stability and clarity
- Large power reserves
- Frequency response: <10 Hz-100 KHz, -3 dB
- Output impedance: <0,08
- Power consumption: Stand by<15 W
- Dimensions (WxDxH): 430x275x95 mm
|
|
Sumiko Primare I30
Like its award-winning predecessor, the A30.1, the I30 integrated amplifier has been created to answer emphatically two design challenges: purity in signal transfer and clean distortion-free amplification. For the I30, Primare has re-evaluated the A30.1, changing components where necessary to improv
|
|
Jolida JD 707A
- Fully integrated stereo amplifier
- Maximum 80 watts peak output
- High quality audio potentiometer
|
|
|
|
|
Musical Fidelity B1
- Power output per channel at 8 Ohms, <1%THD: 35 watts
- Phono MC: 200µV
- Phono MM: 2mV
- Line inputs & Sensitivity: 200mV CD, Tuner, CDV, Tape 1, Tape 2
|
|
Gryphon Audio Callisto 2200
- True Dual Mono configuration
- Flash memory upgrades via PC
- Extensive mechanical decoupling
- Ultra-short signal path
|
|
Rogue Audio Tempest II
Specifications
output power: 90WPC minimum
THD: <0.1% typ., <1% at rated power
frequency response:
20Hz - 20KHz at peak output,
10Hz - 100KHz at 10 watts
input sensitivity: 1.0V RMS
dimensions: 18" W x 15¾" D x 7" H
weight: 60 lbs
shipping weight: 6
|
|
Musical Fidelity X-150
- 75 watts per channel into 8 Ohms
- Doubling to 150 watts into 4 Ohms
- 75 Amps of peak current delivery
- 0.01% distortion
- Highly linear +/- 0.5db 20Hz - 20kHz response
|
|
|
|
|
|
Cayin Audio Distribution A-88T Tube Integrated Amplifier
45w/CH INTEGRATED AMP (ULTRALINEAR)
22w/CH (TRIODE)
ALL TUBE THROUGHOUT
HAND MADE CHASSIS / RIGID CHASSIS FOR A SOLID BUILD PLATFORM
POINT TO POINT WIRING
REMOTE CONTROL
ULTRALINEAR or TRIODE MODE SELECTOR FROM REMOTE
TORODIAL POWER TRANSFORMER
|
|
|
|
|
Bryston B100 SST
- Over 30,000 MFD of filter capacitance per channel
- Three New ultra-low-noise power transformers
- Totally separate ground paths
- New computer modeled heat-sink design
- New Digitally Controlled Analog Volume
- 4 Assignable Digital inputs
|
|
NAD C355BEE
NAD integrated amplifier C355BEE, power output - 80W.
|
|
Accuphase E-212
- Parallel push-pull output stage delivers quality power: 90 watts per channel into 8 ohms
- Current feedback circuit topology provides outstanding high-range phase characteristics
- Logic-controlled relays for optimum signal routing
- Tone control circuitry
|
|
Accuphase E-406V
- Dedicated toroidal transformers and power amplifier and power supply. - Balanced inputs. - Supplied remote commander. - Two sets of large speaker terminals. - Logic-controlled relays allow very short signal paths. - Current feedback principle assures great sound and rock-stable oper
|
|
Accuphase E-530
- Triple parallel push-pull output stage with power MOS-FETs
- driven in pure class A delivers quality power: 30 watts per channel into 8 ohms
- Current feedback principle ensures superb phase characteristics in high frequency range
- Logic-controlled relays fo
|
|
|
|
McIntosh MA6900
- 200 Watts/ Channel
- Power output meters
- Output Autoformers
- 5 Band Equalizer
|
|
|
|
|
Simaudio Moon i-3
100W x 2 into 8 ohms, 160W x 2 into 4 ohms, 200W x 2 into 2 ohms, preamp section operates in Class A, amp section operates in Class A up to 5 watts then switches to Class AB, J-FET preamp input devices, bipolar amp output devices, capacitor-free signal path, no overall feedback, 6 inputs, 1 tape out
|
|
Naim Nait 5i
Integrated amplifier to replace the Nait 5. Rated at 50wpc into 8 ohms, four line-level inputs (CD, Tuner, Tape, A/V), all four of which have RCA sockets and two of which (CD and Tuner) also offer the Naim 5-pin DIN connectors. Amp includes a remote, tape loop, and is fully integrable into a 5-chann
|
|
ROTEL RA-01
40 watts x 2 into 8 ohms
6 inputs, including MM phono and one tape loop
Two sets of speaker outputs
Headphone jack
Defeatable tone control
Balance control
Pre-outs
12 volt trigger output
Detachable IEC power cord
No remote control
|
|
|
|
Dared VP-300B
Model: VP-300B
QUASI-MONOBLOCK POWER AMPLIFIER
(SINGLE-END CLASS A)
TECHNICAL SPECIFICATIONS:
MAX OUTPUT POWER: 6W
FREQUENCY RESPONSE: 20-20KHz (±1.5dB)
DISTORTION: =2%
SIGNAL TO NOISE RATIO: =85dB
INPUT SENSITIVITY: 350mV
INPUT IMPEDANCE: 100K ohm
OUTPUT IMPEDANCE: 4 ohm/8 ohm
SIZE:
|
|
Musical Fidelity X-80
- 40 watts per channelD
- Delivers loads of peak current
- Low output impedance
- Uses a conventional, motorised, analogue volume control
|
|
YBA YA 201
Power output :
100 W per channel - 8 ohms
Signal to noise ratio :
100 dB
Frequency response :
0.5 Hz to 30 kHZ (3db)
Inputs :
6
Outputs :
1 per channel
Consumption :
23 W in standby mode
Input impedance :
10 ohms
Option :
Unified re
|
|
|
|
|
|
Sumiko Primare A10
- J-FET input
- Bi-polar output devices
- High degree of versatility
- Full-function tape monitor
- Pre-out/main-in facility
|
|
Musical Fidelity A3.2
- 100 watts per channel into 8 Ohms
- 170 watts per channel into 4 Ohms
- MC/MM phono input standard
|
|
BV Audio A300S
Power output 2x110W RMS 8ohm, THD < 0.01%, 20Hz-22kHz
2x170W RMS 4ohm, THD < 0.015%, 20Hz-22kHz
Distortion THD+N
(BW 80kHz) max 0.01% / 110W / 8 ohm (20Hz -22kHz)
typical 0.002% / 1kHz , 0.006% / 10kHz
max 0.015% /170W / 4ohm (20Hz - 22kHz)
typical 0.003% /1kHz , 0.008% /10kHz
|
|
Jadis DA 8 Tube Integrated Amplifier
With twice as many output tubes as the DA-5, the DA-8 offers twice the power: it's 80 watt per channel output will drive all but the most inefficient speakers. Like the DA-5, the DA-8's handsome black chassis is fronted with a gold colored front panel. Another nice feature--tube saving standby s
|
|
|
|
Arcam DIVA A70
• 55 wpc continuous output into 8 ohms
• Ultra short signal path with class leading fidelity
• Sophisticated menu with text display
• MM phono stage included
• Massive toroidal transformer based power supply
• Mask of Silence technology inc. “Stealth Mat”
• Full function remo
|
|
|
|
|
|
|
|
Linar Audio Linar 10
- Signal path is free of capacitance
- Extremely stable under capacitive load
- Advanced Soft Start circuit
- Fully complementary design from input to output
|
