|
RANE MA4
- 4 channels at 100W each in a 1U size unit
- Universal voltage switching power supply
- Low inrush current
- Built-in load monitoring
- Adjustable hi-pass filters
|
|
RANE MA6S
- Six Channel Power Amplifier
- High current power supply
- Quiet variable speed fan
- 80Hz high pass filter
- 70 or 100 volt systems
|
|
RBH Sound SA-150
- Amplifier Type: Discrete Class A/B
- Power Output: 150 Watts RMS 4 Ohms
- S/N Ratio: >82dB
- Line Level Input Impedance: 45 Kohms
- Speaker Level Input Impedance: 200 Ohms
- Line Level Input Sensitivity: 80 mV
|
|
RBH Sound SA-200
- Amplifier Type: Discrete Class A/B
- Power Output: 200 Watts RMS 4 Ohms
- S/N Ratio: >82dB
- Line Level Input Impedance: 45 Kohms
- Speaker Level Input Impedance: 200 Ohms
- Line Level Input Sensitivity: 80 mV
|
|
RBH Sound SA-400
- Amplifier Type: Discrete Class A/B
- Power Output: 400 Watts RMS 4 Ohms
- Line Level Input Impedance: 45 Kohms
- Speaker Level Input Impedance: 200 Ohms
- Line Level Input Sensitivity: 80 mV
- Speaker Level Input Sensitivity: 2.9V
- Crossover
|
|
RCF ED 1100
- Input Sensitivity: 0dBm (0.775V RMS)
- Signal-to-Noise Ratio: > 70dB @ 1KHz
- Output Connectors: Neutrik Speakon
- Power Consumption: Max 10A
- Power Requirements: 230VAC Power Supply
|
|
RCF ED 600
- Damping Factor: > 200:1 (8Ohm)
- Input Sensitivity: 0dBm (0.775V RMS)
- Signal-to-Noise Ratio: > 70dB @ 1KHz
- Power Consumption: Max 6A
- Power Requirements: 230VAC Power Supply
|
|
RCF HC 1600
- Damping Factor: > 200:1 (8Ohm)
- Input Sensitivity: 0dBm (0.775V RMS)
- Signal-to-Noise Ratio: > 70dB @ 1KHz
- Power Requirements: 230VAC Power Supply
|
|
RCF HC 2000
- 1000W @ 2Ohm Stereo
- XLR and 1/4" Phone Inputs
- Signal-to-Noise Ratio: > 70dB @ 1KHz
- Power Requirements: 230VAC Power Supply
|
|
RCF HC 3200
- Input Sensitivity: 0dBm (0.775V RMS)
- Signal-to-Noise Ratio: > 70dB @ 1KHz
- Power Requirements: 230VAC Power Supply
|
|
RDL Acoustics FP-PA20
- 20 Watts RMS Audio Power Amplifier
- Integral Audio Compressor to Control Clipping
- High Overall Operating Audio Level
- Maximized Audio Level for Output Power
- Audio Quality Superior to Standard Amplifiers
|
|
RDL Acoustics FP-PA20B
- 20 Watts RMS Constant Voltage Amplifier
- Integral Audio Compressor to Control Clipping
- High Overall Operating Audio Level
- Maximized Audio Level for Output Power
- Audio Quality Superior to Standard Amplifiers
|
|
RDL Acoustics RU-PA518
- 9 W RMS per Channel Stereo into 4 Ohm
- 18 W RMS Mono into 8 Ohm
- Selectable Stereo or Bridged Mono
- Selectable Built-In Peak Limiter
- 1/3 Rack, High-Density Rack Mounting
|
|
RDL Acoustics ST-PA18
- 18 Watts RMS Audio Power Amplifier
- Output for 8 Ohm Speaker
- Maximized Audio Level at Full Power Output
- Superior Audio Quality at High Output Levels
- Line Level Balanced or Unbalanced Input
|
|
RDL Acoustics TX-PA40D
- Switch-Selectable Stereo or Mono Operation
- Compressor/Limiter Controls Clipping
- LED to Indicate Audio Compression Threshold
- Outputs Drive 4 or 8 Ohm Speakers
- High-Efficiency Class D Operation
|
|
|
|
|
|
|
|
|
Rega Exon 3
High performance symetrical circuit power amplifier housed in the new Rega built extruded aluminium case with heat sink.
Power: 125w per channel @ 8W; 200w per channel @ 4W
Symmetrical Circuit
Regulated power supply
Rega custom built extruded aluminium case
|
|
|
|
Rega Maia 3
85 watt per channel high performance audio power amplifier housed in the Rega custom built extruded aluminium case. The amplifier has a fully protected output stage with DC and electronic thermal protection, and a power monitor for both transformers. High quality Evox capacitors have been used in th
|
|
Rega Mira 3
- High performance audio amplifier
- Alpha-Encoder control system
- 60 Watt integrated amplifier
- Active speaker systems
- High performance AV system
|
|
|
|
|
|
|
|
Rogue Audio M-150 Monoblock
M-150 MonoBlock Tube Amplifiers
General Features:
Ultra-wide bandwith output transformers
Massive high storage power supply
True balanced and single ended inputs
Heavy-duty gold plated XLR and RCA inputs
External switch for triode or ultralinear operation
In
|
|
Rogue Audio Stereo 90
Stereo 90
General Features:
Ultra-wide bandwidth output transformers
Massive fully regulated high voltage supply
Matched quad output tubes
Heavy-duty gold plated RCA inputs
Heavy-duty gold plated binding posts
User selectable 4 and 8 ohm output taps
U
|
|
|
|
Rogue Audio Titan Series Metis
- 6SN7 line stage tubes
- 12 dB gain line stage
- Slow start feature extends tube life
- Solid state phono w/ 35dB gain
- Headphone amplifier
|
|
Rogue Audio Zeus
Zeus Power Tube Amplifier
General Features:
Completely dual mono design
Massive high storage power supply
Ultra-high performance transformers
Built in bias meters and bias tool
All precision components
12 x KT88, 4 x 12AU7, 2 x 12AX7 tube complement
1
|
|
|
|
|
|
Rolls HA43 Amplifier
The HA43 Is For Expanding Or Generating Headphone Channels. It Has A 1/4" Stereo Input, 4 Volume Controls, 4: 1/4" Stereo Output Jacks and Is Powered By An AC Adaptor (Included). The HA43 Has A 20Hz-20kHz Response, and Its Small Size, and Overall Design Make It Very Easy To Use.
|
|
Rolls MA1705
- Two Microphone inputs with phantom power
- Tone controls for each Mic input
- Three stereo Source inputs
- Dual pre-master level Record Output
|
|
Rolls MA2152
- I9Tone controls for each Mic input
- Stereo pre-master level Record Output
- Fault protected power amp
- Three stereo Source inputs
|
|
Rolls MA2355
- Tone controls for each Mic input
- Three stereo Source inputs
- Dual pre-master level Record Output
- Spring-loaded output terminals
|
|
Rolls MP13 Mini Microphone 1-Channel Amplifier
The MP13 is a single channel microphone preamp that is designed to provide a small, simple, and inexpensive solution for a variety of applications. The unit has both XLR and 1/4" inputs and outputs, and a single gain control with a clip indicator. Phantom powering (+36V) is included for use with a c
|
|
Rolls RA170
- Mono 70 volt amplifier
- Drives 70 volt speakers directly
- Choice of RCA coaxial or 1/4" TS phono input
- Spring loaded speaker output
- Clip indication
- Fault protection output
|
|
Rolls RA200
- Stereo power amplifier
- Mofset drivers in a voltage and current gain circuit
- Four LED power-output meters per channel
- Fault protected outputs
|
|
Rolls RA2100B
- Stereo power amplifier
- Each channel offers both 4 and 8 ohm, or 25V (both channels) and 70V (bridged) operation
- MOFSET drivers in a voltage and current gain circuit
- Four LED power-output meters per channel
- Fault protected outputs
|
|
Rolls RA235
- Stereo power amplifier
- 35 watts per channel of clean amplification
- Level controls and clip indicators
- RCA coaxial input connectors
- Convenient spring-loaded output terminals
|
|
Rolls RA900
- Stereo power amplifier
- Overload and thermal protection modes
- 30 and 50Hz high pass filters
- Twin input-thru connectors on male XLR
- Functions in stereo or bridged mono modes
|
|
Rolls RDB109 1-Channel Amplifier
The RDB109 Is An Audio Distribution Device With A Single Balanced XLR Input, Distributed Via Isolation Transformers To Ten Balanced XLR Outputs. It Is Intended For Professional Audio Applications Such As Television and Radio Where a Single Source Needs to Be Distributed To Several Cameras or Recorde
|
|
Rolls VP129 Amplifier
Music Hall imports some of the best-value A/V components you''ll find anywhere. But this time, Roy Hall found a gem that''s made in the USA - Utah, to be exact. The Bellari Rolls VP129 is a compact phono preamp that bristles with classic audiophile features. The vacuum tube circuitry is based on a d
|
|
|
|
ROTEL RB 1070
The newest interpretation of a classic Rotel award-winning power amplifier design, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topol-ogy assures the precise interchannel timing clues necessary for
|
|
|
ROTEL RB 980BX
Discontinued, price may be lower.
120 watt stereo amplifier
|
|
ROTEL RB-03
- Damping Factor (8 ohms)
- Input Impedance/Sensitivity 500)
- Input Overload Level)
- Frequency Response 1.0V / 33 kOhms)
- Power Consumption: 250 watts)
- Power Requirements:115 volts, 60 Hz)
- 230 Volts, 50 Hz)
- Weight (net): 8.1kg
|
|
ROTEL RB-1050
70 watts x 2 into 8 ohms, daisy chain link out, input trim, 12V trigger input, signal sensing auto on, detachable power cord
|
|
ROTEL RB-1080
200 watts x 2 into 8 ohms, balanced and unbalanced inputs, 12V trigger input, removeable power cord
|
