|
HA8000
- Dual independent Main inputs
- 8 individual Direct inputs
- Paralleled outputs for multi-unit cascading
- Ultra high frequency response up to 150 kHz
- Switchable power supply
|
|
|
PMP518M
- 24 Bit Effects Processor
- FBQ Feedback Detection
- Portable Design
|
|
|
HC 6
Featuring six stereo headphone amplifiers, the HC 6 performs a number of necessary tasks, not all of which are headphone related. The HC 6 provides Master stereo 1/4"" TRS Inputs which can drive any or all of the 6 stereo headphone amplifiers. A Mono switch is provided on the front panel to drive both channels of all six amplifiers from a common mono source. Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required. Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear. The HC 6 is capable of delivering up to 450 milliwatts per channel into headphones with rated impedances between 32-600 ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB. This level is above the threshold of pain and is suitable for most listeners.
|
|
|
HC-4
- Balanced stereo master inputs
- Four output level controls and overload indicators
- Drives 32-600 ohm headphones
- Extremely low noise
|
|
|
AF-SH1
- Panel-Mounted Headphone Amplifier
- Wall-Mounted Headphone Amplifier
- Integral Long-Life VCA Stereo Level Control
- Balanced or Unbalanced Inputs
- Switch-Selectable Input Sensitivity
|
|
|
S-phone
- Four Channel Headphone Mixer/Amplifier
- Two Master Stereo Inputs plus Stereo Link Output
- 8 Segment LED Metering on Each Channel and Master
- Two Band Equalizer on Each Channel
- Three Headphone Outputs per Channel (One Front Panel and Two Rear Panel Outputs)
- Auxiliary Input with Balance Control provides four Channels of "More Me" Mixing
- Mute and Stereo/2 Channel Mode Switches on Each Channel
- Maximum Output Power on Each Channel (Regardless of Headphone Impedance)
|
|
|
MDR-RF920RK 900 MHz Wireless Headphones Wireless Headphones
900 MHz Wireless Headphones On-the-ear earcups, self-adjusting double headband with auto power on/off sensor, manual tuning, built-in NiMH rechargeable batteries and charger, switchable noise filter for use when connecting to TV or VCR
|
|
2 of 5
0 of 5
