Your search returned 506 products
Listing 1 thru 50
|
| |
|
|
SP6 In Wall
Think in-wall speakers can't compete with big kids on the block? Think again. JBL audio technology delivers easy-to-install in-wall speakers that can fill a room with rich, powerful, engaging sound. Whether you want to spread music through the house or make that home theater system disappear from sight, JBL SoundPoint speakers will get the job done. - The titanium-laminate cone woofer with rubber surround delivers tight bass for extended listening sessions. - Includes integrated dog-ear brackets for retrofit applications.
|
|
|
Omnisat
- Magnetically Shielded Omnipolar Satellite
- Frequency Response:70 Hz-20KHz, +/- 3dB
- Tweeter:1" (25mm) PTH Pure Titanium Hybrid
- Amplifier Power:10 to 150-watts RMS/Channel
- Woofer:4.5" Polypropylene Titanium Deposit Hybrid
|
|
|
iC3
iC3 Ceiling Speaker in Paintable White
Frequency response: 50 Hz - 20 kHz, +/- 3 dB
Sensitivity: 85 dB (2.83V at 1M)
Crossover: 1.9 kHz, 18 dB / octave high pass; 12 dB / octave low pass
Impedance: 8 ohms nominal
Recommended amplifier power: 10 W / channel minimum, 125 W / channel maximum
Cutout dimensions: 8-13/16" diameter
Bezel dimensions: 9-11/16" diameter
Depth behind wall: 4-13/16”
Weight: 5 lbs.
|
|
|
CM8HD
- 8" injection-molded TCC (talc-, carbon-, and ceramic-filled) polypropylene woofer with butyl rubber surround
- 1" fluid-cooled, ultra-wide dispersion Teteron trilaminate tweeter in custom pivoting enclosure
- tweeter pivots up to 20 degrees
- baffle-mounted bass and treble adjustment switches
- selectable 4- or 8-ohm impedance
- moisture- and UV-resistant
- white finish
- easy-flip tab mounting system
- recommended amplifier power: 10 to 150 watts
- frequency response 40-21,000 Hz (±3dB)
- sensitivity 90 dB
- dimensions: 10-11/16" diameter
- cutout dimensions: 9-1/2" diameter
- depth above ceiling: 5" (assumes 1/2" sheetrock)
- optional mounting bracket required for new construction
|
|
|
621T
- Frequency Response: 60Hz to 20,000 Hz ?3dB
- Impedance: 8 ohms nominal, 6 ohms minimum
- Power Handling: 5 to 50 watts
- SPL: 88 dB 1W/1m
- Grilles: Metal/Cloth
|
|
|
IW3
The iW3 takes NHT's new 3-way in-wall design to the limit. The iW3 features an aluminum 6.5" long-throw woofer and two aluminum 1.25" midrange drivers plus an aluminum 3/4" tweeter. It combines the same broad dispersion and pristine midrange response as the iW2 with higher output and even lower distortion. All iW series in-wallspeakers are moisture resistant allowing placement in areas of high humidity. The iW3 is ideal for home theater and other critical listening room installations.
|
|
|
RC85i
RCi Series In-Wall Speakers deliver incredible Polk sound to every room in your home without using any floor or shelf space! Now you have new options for more flexibility and performance from Polk Audio.
|
|
|
ATI-8
- 8" Carbon-Filled Polypropylene Cone
- Pivoting 1" Ferro-Fluid Cooled Dome Tweeter
- 200 Watts Max Power Handling
- Frequency Response 40Hz - 20,000Hz
- Sensitivity 90dB 1 Watt / 1 Meter
|
|
|
iC4
iC4 Premium Ceiling Speaker in Paintable White
Frequency response: 40 Hz - 20 kHz, +/- 3 dB
Sensitivity: 87 dB (2.83V at 1M)
Crossover: 1.6 kHz, 18 dB / octave high pass; 12 dB / octave low pass
Impedance: 8 ohms nominal
Recommended amplifier power: 10 W / channel minimum, 150 W / channel maximum
Cutout dimensions: 10.25" diameter
Bezel dimensions: 11.25" diameter
Depth behind wall: 4.75”
Weight: 7 lbs.
|
|
|
ERS 310
- 1" C.M.M.D. tweeter
- 8" C.M.M.D. woofer
- Handles up to 135 watts
- Frequency response 45-22,000 Hz (±3dB)
- Sensitivity: 89 dB
- 8-ohm impedance
|
|
|
HTi6C In Ceiling Speaker
This 2-way in-ceiling loudspeaker delivers powerful, clear JBL sound in a space-saving package. The polymer-coated aluminum cone with rubber surround can handle plenty of bass for an extended listening session, such as a house party, without producing significant distortion. Includes integrated dog-ear brackets for retrofit applications. Optional snap-together rough-in frames (RIF6C) available separately for new construction.
|
|
|
R-5650-S
FACTORY AUTHORIZED
5 Year Warranty
Engineered to bring a new dimension of reality and convenience to a flush-mount design, the Klipsch R-5650-S in-wall surround sound speaker features a unique patented horn array that allows system designers to create enveloping sound fields and localized effects without disrupting a home's d©cor. In fact, Electronic House Expo (EHX) voted it 2005's best in-wall speaker on the market for less than $1,000 a pair.
Features
Two vertically stacked Tratrix Horn-loaded tweeters to maximize diffusion
Very high sensitivity and power handling
Paintable rust-proof aluminum grille
R receiver knock out
|
|
|
R-5650-W
FACTORY AUTHORIZED
5 Year Warranty
Sophisticated, yet uncomplicated, the Klipsch R-5650-W in-wall loudspeaker will forever change the way you view or listen to architectural audio. Whether used for home theater or stereo music applications, this high-quality and installer-friendly model challenges the performance of comparable standalone speakers.
Features
Very high sensitivity and power handling
Pivoting Tractrix Horn tweeter for clear sound in any location
Treble and midbass attenuation switches and IR receiver knock out
Single piece grille frame and rustproof aluminum grille
|
|
|
RCR-3
The Reference Series RCR-3 two-way, in-ceiling loudspeaker proves that Klipsch engineers are magicians. How else could they pack a titanium diaphragm tweeter, a 6.5” woofer, a premium-grade circuit board and high-quality network into such a small, visually elusive speaker? And that’s before you even hear it. The RCR-3 outperforms bigger, more expensive models because it expertly applies all of today’s top technologies along with Klipsch’s exclusive rotating Tractrix® Horn.
|
|
|
RCW5
KLIPSCH IN-WALL SPEAKERS 50-200 WATTS 8'''' => Model RCW-5
|
|
|
CM6.3SI
Looking for stereo sound from a single speaker? Check out the Niles Audio Stereo Input line. The ceiling-mounted 6.3Si comes with dual 3/4" Kaladex tweeters and a 6-1/2" mica-filled polypropylene woofer with rubber surround you enjoy pleasing stereo sound, whether in a small space that can't accommodate two speakers (like a powder room) or a larger space where a stationary "sweet spot" is impractical (such as a porch or hallway). Dual no-strip speaker wire terminals make for easy connection to your system.
Key Features:
- 6-1/2" woofer
- 3/4" Kaladex tweeters
- recommended amplifier power: 5 to 100 watts
- frequency response 60-21,000 Hz (±3dB)
- sensitivity 88 dB
- dimensions: 9-1/4" diameter
- cutout dimensions: 8-1/16" diameter
- depth above ceiling: 4-11/16" (assumes 1/2" sheetrock)
- patented 2-piece, no-strip speaker wire terminals (accomodate 12- to 20-gauge speaker wire)
- paintable, rustproof, white-finish aluminum grilles; ideal for moist environments
- warranty: 5 years
|
|
|
LC65i
- Frequency response 45-26,000 Hz (-3dB)
- 1" swivel-mount Ring Radiator tweeter
- 6-1/2" Dynamic Balance woofer
- Handles up to 125 watts
- Sensitivity 90 dB
- 4-ohm impedance
- Power Port technology
- Wall distance toggle switch and tweeter level switch
|
|
|
RC60I
POLK AUDIO IN-CEILING SPEAKERS, 20-100 WATTS, 6 1/2 => Model RC60I
|
|
|
NS-IW760
- Dual 6.5" Woofers
- 1" Soft-Dome Tweeter
- Maximum Input: 130-Watts
- Impedance: 6 Ohms
- Sensitivity: 88dB
- Frequency Response: 50Hz~24kHz
|
|
|
191
- proprietary ported enclosures for reliable bass response
- two 2-1/2" full-range drivers
- recommended power 10-100 watts with receivers rated from 4 to 8 ohms
- paintable white finish on grilles and grille frames
- optional kit required for new construction; see "Recommended Accessories"
- rectangular cutout: 8-1/16"W x 5-1/2"H
- round cutout: 9-5/8" diameter
- speaker dimensions: 13-3/4"W x 7-7/8"H x 3-7/8"D
- mounting depth: 4-1/8"D
|
|
|
300AX
Dual 5.25" 80W In Wall (Single)
|
|
|
VI38
BIC VI-38 Venturi 8" 3 Way Inwall Speakers
|
|
|
IC2
The iC2 features NHT’s patented 3-tweeter array. This unique feature results in flat frequency response up to 60 degrees off-axis and results in a consistent sound field throughout the listening area. The iC2 features a 6.5" long-throw, polypropylene woofer and three 1" soft-dome tweeters. All components are moisture resistant, making placement possible in areas of high humidity or outdoors under overhangs. The iC2 is ideal for surround channels or wherever high performance sound is required. The iC2 can be installed in new construction or retro-fit into existing construction and is available in a paintable matt white finish.
|
|
|
C600iw
- Acoustically transparent, perforated steel grille
- Automatic tweeter protection
- Depth from front of wall: 3 1/8”
- Finish: Paintable architectural white
- Mounting hole: 7 3/8” x 10 3/4”
- One 1" soft-dome tweeter
|
|
|
SC620KE
- ¾" Pivoting Textile Soft Dome Tweeter
- 91 dB Sensitivity
- 12 dB/octave Crossover
- 45 Hz - 20,000 Hz Frequency Response
- 80 Watts Max. Power Handling
|
|
|
SC802E
- Freq. Response 35Hz - 20,000Hz
- 100 Watts Max
- Sensitivity 91 dB 1 Watt / 1 Meter
- 8" Butyl Rubber Surround Woofer
- 3/4" Pivoting Dome Tweeter
|
|
|
SC820KE
- 1" pivoting textile soft dome Tweeter
- 91 dB Sensitivity
- 12 dB/octave crossover
- 35 Hz - 20,000 Hz Frequency Response
- 50 watts nom. 100 watts max. Power Handling
|
|
|
SE-893 KE
- 1" pivoting textile soft dome Tweeter
- 1 1/2" textile soft dome midrange
- 12 dB/octave crossover
- Poly-switch overdrive protection
- IR knock-out
- 91 dB Sensitivity
- 35 Hz - 20,000 Hz Frequency Response
- 50 watts nom. 100 watts max. Power Handling
|
|
|
SE790KE
- 1" pivoting textile soft dome Tweeter
- 12 dB/octave crossover
- Poly-switch overdrive protection
- IR knock-out
- 91 dB Sensitivity
- 45 Hz - 20,000 Hz Frequency Response
- 40 watts nom. 80 watts max. Power Handling
|
|
|
Sound SM52 Main / Stereo Speaker
The Atlas Sound Strategy Series® II two-way, surface-mount loudspeaker systems are ideal for indoor and outdoor installation in conference rooms & classrooms, boutiques/shops, restaurants/cafes, decks/patios, recreation/sport centers, amusement/theme parks, and houses of worship.
|
|
|
AT-802
- 8" woofer
- Power handling: 200W
- Freq resp: 45 Hz-20 kHz
- Dim: 10" x 14" (cutout 8.875" x 12")
|
|
|
AST-220S Rear Speaker
• Extruded Aluminum housing with metal grills. • Ideal for Plasma and LCD monitors. • Center channel sold as singles and satellites in pairs. • Includes wall mounting brackets and hardware.
|
|
|
Audio QS4 Speaker
Surround sound is the most exciting part of home theater - and Axiom's QS4s place you in the center of the action. Using unique multi-directionally firing drivers, the QS4 has woofers on the top and bottom, and tweeters left and right, to provide unprecedented envelopment. This is a great choice for a small to medium rooms , using moderate to high amplification. Binding posts are 5-way gold-plated connectors.
|
|
|
Audio QS8 Speaker
Stunning surround sound that will turn your living room into the neighbourhood's favourite place to watch movies. You may never go to a movie theater again! With twin titanium tweeters and dual aluminum woofers top and bottom, the QS8 delivers all the dynamics present in Dolby Digital and DTS soundtracks. Every home theater review cites the QS8s' stunning envelopment as the key to an amazing listening experience. The Quadpolar QS8s are best in medium to large rooms with moderate to high-powered amplifiers or receivers.
|
|
|
151SE Main / Stereo Speaker
Weather Resistant for use Indoors and Outdoors / 10 to 100 Watts per channel Handling Capacity / Mounting Brackets / BLACK
|
|
|
251 Main / Stereo Speaker
Award-winning 251 environmental speakers let you enjoy rich balanced stereo sound over a much wider area than most conventional outdoor speakers And 251 environmental speakers are tough enough to beat the weather These speakers connect to your stereo components or Lifestyle system and mount to your exterior walls
|
|
|
Virtually Invisible 191
Bose 191 flush-mount speakers blend into your room so beautifully, only their noteworthy performance will remind you they're there. Install as ceiling speakers or in-wall speakers, connect to your stereo or surround sound components, and enjoy wide, spacious sound coverage while these Virtually Invisible speakers almost disappear. Music to your ears—and easy on your eyes, thanks to the proprietary Bose technologies in these Virtually Invisible speakers.
|
|
|
DSI260
- Frequency Response: 65Hz-20KHz
- Impedance: 8 ohms
- Recommended amplifier power (Watts): 10-90 watts
- Sensitivity: 90dB
- Mounting Depth: 3 inches
|
|
|
DSI450
- 5¼" copolymer woofer
- 1" Kortec soft dome tweeter
- Low-diffraction baffle
- Aluminum grille
- IR sensor knockout
|
|
|
DSi453
- Frequency response: 65-20,000 Hz
- Dual 5-1/4" woofers
- 1" Kortec dome tweeter
- Sensitivity: 89 dB
- Handles up to 125 watts
|
|
|
DSI455
- 6 Copolymer Woofer (for deep, tight bass)
- 75 Pivoting Kortec Tweeter (for crystal-clear highs)
- Aluminum grill and stainless steel screws
- Sold in pairs only
|
|
|
DSi455T2
- Stereo input speaker
- Dual 3/4" tweeters
- 6" woofer
- Frequency response: 75-20,000 Hz
- Sensitivity: 92 dB
- 8-ohm impedance
|
|
|
DSI460
- 1 Kortec soft dome tweeter (for crisp, accurate highs)
- 6.5" DCD Copolymer Woofer (for deep, dramatic bass)
- Can be installed seamlessly in your wall
- Sold in pairs only
|
|
|
DSI465
- 1" Kortec soft dome tweeter (for crisp, accurate highs)
- 6.5" DCD Copolymer Woofer (for deep, dramatic bass)
- Can be installed seamlessly in your wall
|
|
|
DSI480
- 1" Kortec soft dome tweeter (for crisp, accurate highs)
- 8" DCD Copolymer Woofer (for deep, dramatic bass)
- Can be installed seamlessly in your wall
|
|
|
DSI485
- 1" Kortec soft dome tweeter (for crisp, accurate highs)
- 8" DCD Copolymer Woofer (for deep, dramatic bass)
- Can be installed seamlessly in your wall
|
|
|
DSi495
- 1" Kortec dome tweeter
- 3-1/2" midrange
- Frequency response: 48-20,000 Hz
- Sensitivity: 88 dB
- 8-ohm impedance
|
|
|
VRI555
- 6" DCD(TM) copolymer woofer
- Pivoting 1" aluminum VR tweeter
- High performance in-ceiling speaker with 6-inch woofer
- Floating tweeter island for wide dispersion
|
|
|
VRi565
- 1" pivoting aluminum VR tweeter
- 6-1/2" cast woofer
- Cast aluminum baffle
- Handles up to 125 watts
- Sensitivity 89 dB
- 8-ohm impedance
|
|
|
VRi595
- 1" pivoting aluminum VR tweeter
- 3-1/2" cast midrange
- 8" cast woofer
- Midrange and tweeter mounted on rotating
- Handles up to 150 watts
- 8-ohm impedance
- Dual inputs
|
|
|
|
|
5 of 5
4.33 of 5
2.75 of 5
2 of 5
1 of 5
0 of 5
